IPv4 Subnet Calculator
Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.
private IP (RFC 1918)10.109.0.0/17
network10.109.0.0/17
broadcast10.109.127.255
first host10.109.0.1
last host10.109.127.254
subnet mask255.255.128.0
wildcard0.0.127.255
addresses32,768
usable hosts32,766
classA
ipcalc 10.109.0.0/17
address00001010.01101101.00000000.00000000
subnet mask11111111.11111111.10000000.00000000
network00001010.01101101.00000000.00000000
broadcast00001010.01101101.01111111.11111111
green = network part, grey = host part
hex0x0a6d0000
decimal174915584
reverse dns0.0.109.10.in-addr.arpa
ipv4-mapped::ffff:a6d:0
/17 split into /22 · 32 subnets
close ×| # | network | host range | broadcast |
|---|---|---|---|
| 1 | 10.109.0.0/22 | 10.109.0.1 – 10.109.3.254 | 10.109.3.255 |
| 2 | 10.109.4.0/22 | 10.109.4.1 – 10.109.7.254 | 10.109.7.255 |
| 3 | 10.109.8.0/22 | 10.109.8.1 – 10.109.11.254 | 10.109.11.255 |
| 4 | 10.109.12.0/22 | 10.109.12.1 – 10.109.15.254 | 10.109.15.255 |
| 5 | 10.109.16.0/22 | 10.109.16.1 – 10.109.19.254 | 10.109.19.255 |
| 6 | 10.109.20.0/22 | 10.109.20.1 – 10.109.23.254 | 10.109.23.255 |
| 7 | 10.109.24.0/22 | 10.109.24.1 – 10.109.27.254 | 10.109.27.255 |
| 8 | 10.109.28.0/22 | 10.109.28.1 – 10.109.31.254 | 10.109.31.255 |
| 9 | 10.109.32.0/22 | 10.109.32.1 – 10.109.35.254 | 10.109.35.255 |
| 10 | 10.109.36.0/22 | 10.109.36.1 – 10.109.39.254 | 10.109.39.255 |
| 11 | 10.109.40.0/22 | 10.109.40.1 – 10.109.43.254 | 10.109.43.255 |
| 12 | 10.109.44.0/22 | 10.109.44.1 – 10.109.47.254 | 10.109.47.255 |
| 13 | 10.109.48.0/22 | 10.109.48.1 – 10.109.51.254 | 10.109.51.255 |
| 14 | 10.109.52.0/22 | 10.109.52.1 – 10.109.55.254 | 10.109.55.255 |
| 15 | 10.109.56.0/22 | 10.109.56.1 – 10.109.59.254 | 10.109.59.255 |
| 16 | 10.109.60.0/22 | 10.109.60.1 – 10.109.63.254 | 10.109.63.255 |
| 17 | 10.109.64.0/22 | 10.109.64.1 – 10.109.67.254 | 10.109.67.255 |
| 18 | 10.109.68.0/22 | 10.109.68.1 – 10.109.71.254 | 10.109.71.255 |
| 19 | 10.109.72.0/22 | 10.109.72.1 – 10.109.75.254 | 10.109.75.255 |
| 20 | 10.109.76.0/22 | 10.109.76.1 – 10.109.79.254 | 10.109.79.255 |
| 21 | 10.109.80.0/22 | 10.109.80.1 – 10.109.83.254 | 10.109.83.255 |
| 22 | 10.109.84.0/22 | 10.109.84.1 – 10.109.87.254 | 10.109.87.255 |
| 23 | 10.109.88.0/22 | 10.109.88.1 – 10.109.91.254 | 10.109.91.255 |
| 24 | 10.109.92.0/22 | 10.109.92.1 – 10.109.95.254 | 10.109.95.255 |
| 25 | 10.109.96.0/22 | 10.109.96.1 – 10.109.99.254 | 10.109.99.255 |
| 26 | 10.109.100.0/22 | 10.109.100.1 – 10.109.103.254 | 10.109.103.255 |
| 27 | 10.109.104.0/22 | 10.109.104.1 – 10.109.107.254 | 10.109.107.255 |
| 28 | 10.109.108.0/22 | 10.109.108.1 – 10.109.111.254 | 10.109.111.255 |
| 29 | 10.109.112.0/22 | 10.109.112.1 – 10.109.115.254 | 10.109.115.255 |
| 30 | 10.109.116.0/22 | 10.109.116.1 – 10.109.119.254 | 10.109.119.255 |
| 31 | 10.109.120.0/22 | 10.109.120.1 – 10.109.123.254 | 10.109.123.255 |
| 32 | 10.109.124.0/22 | 10.109.124.1 – 10.109.127.254 | 10.109.127.255 |
01 / table
IPv4 CIDR prefix table.
Click a prefix longer than your network to split it into subnets.
| prefix | subnet mask | addresses | hosts | in your /17 |
|---|---|---|---|---|
| /0 | 0.0.0.0 | 4,294,967,296 | 4,294,967,294 | - |
| /1 | 128.0.0.0 | 2,147,483,648 | 2,147,483,646 | - |
| /2 | 192.0.0.0 | 1,073,741,824 | 1,073,741,822 | - |
| /3 | 224.0.0.0 | 536,870,912 | 536,870,910 | - |
| /4 | 240.0.0.0 | 268,435,456 | 268,435,454 | - |
| /5 | 248.0.0.0 | 134,217,728 | 134,217,726 | - |
| /6 | 252.0.0.0 | 67,108,864 | 67,108,862 | - |
| /7 | 254.0.0.0 | 33,554,432 | 33,554,430 | - |
| /8 | 255.0.0.0 | 16,777,216 | 16,777,214 | - |
| /9 | 255.128.0.0 | 8,388,608 | 8,388,606 | - |
| /10 | 255.192.0.0 | 4,194,304 | 4,194,302 | - |
| /11 | 255.224.0.0 | 2,097,152 | 2,097,150 | - |
| /12 | 255.240.0.0 | 1,048,576 | 1,048,574 | - |
| /13 | 255.248.0.0 | 524,288 | 524,286 | - |
| /14 | 255.252.0.0 | 262,144 | 262,142 | - |
| /15 | 255.254.0.0 | 131,072 | 131,070 | - |
| /16 | 255.255.0.0 | 65,536 | 65,534 | - |
| /17 | 255.255.128.0 | 32,768 | 32,766 | 1 |
| /18 | 255.255.192.0 | 16,384 | 16,382 | 2 split → |
| /19 | 255.255.224.0 | 8,192 | 8,190 | 4 split → |
| /20 | 255.255.240.0 | 4,096 | 4,094 | 8 split → |
| /21 | 255.255.248.0 | 2,048 | 2,046 | 16 split → |
| /22 | 255.255.252.0 | 1,024 | 1,022 | 32 split → |
| /23 | 255.255.254.0 | 512 | 510 | 64 split → |
| /24 | 255.255.255.0 | 256 | 254 | 128 split → |
| /25 | 255.255.255.128 | 128 | 126 | 256 split → |
| /26 | 255.255.255.192 | 64 | 62 | 512 split → |
| /27 | 255.255.255.224 | 32 | 30 | 1,024 split → |
| /28 | 255.255.255.240 | 16 | 14 | 2,048 split → |
| /29 | 255.255.255.248 | 8 | 6 | 4,096 split → |
| /30 | 255.255.255.252 | 4 | 2 | 8,192 split → |
| /31 | 255.255.255.254 | 2 | 2 | 16,384 split → |
| /32 | 255.255.255.255 | 1 | 1 | 32,768 split → |
02 / faq
About this calculator.
How do I use this subnet calculator?
▼
Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.
Why are usable hosts always 2 fewer?
▼
The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.
Can I use it from a terminal?
▼
Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.