ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.108.0.0/15
network10.108.0.0/15
broadcast10.109.255.255
first host10.108.0.1
last host10.109.255.254
subnet mask255.254.0.0
wildcard0.1.255.255
addresses131,072
usable hosts131,070
classA
ipcalc 10.108.0.0/15
address00001010.01101100.00000000.00000000
subnet mask11111111.11111110.00000000.00000000
network00001010.01101100.00000000.00000000
broadcast00001010.01101101.11111111.11111111
green = network part, grey = host part
hex0x0a6c0000
decimal174850048
reverse dns0.0.108.10.in-addr.arpa
ipv4-mapped::ffff:a6c:0

/15 split into /21 · 64 subnets

close ×
#networkhost rangebroadcast
110.108.0.0/2110.108.0.1 – 10.108.7.25410.108.7.255
210.108.8.0/2110.108.8.1 – 10.108.15.25410.108.15.255
310.108.16.0/2110.108.16.1 – 10.108.23.25410.108.23.255
410.108.24.0/2110.108.24.1 – 10.108.31.25410.108.31.255
510.108.32.0/2110.108.32.1 – 10.108.39.25410.108.39.255
610.108.40.0/2110.108.40.1 – 10.108.47.25410.108.47.255
710.108.48.0/2110.108.48.1 – 10.108.55.25410.108.55.255
810.108.56.0/2110.108.56.1 – 10.108.63.25410.108.63.255
910.108.64.0/2110.108.64.1 – 10.108.71.25410.108.71.255
1010.108.72.0/2110.108.72.1 – 10.108.79.25410.108.79.255
1110.108.80.0/2110.108.80.1 – 10.108.87.25410.108.87.255
1210.108.88.0/2110.108.88.1 – 10.108.95.25410.108.95.255
1310.108.96.0/2110.108.96.1 – 10.108.103.25410.108.103.255
1410.108.104.0/2110.108.104.1 – 10.108.111.25410.108.111.255
1510.108.112.0/2110.108.112.1 – 10.108.119.25410.108.119.255
1610.108.120.0/2110.108.120.1 – 10.108.127.25410.108.127.255
1710.108.128.0/2110.108.128.1 – 10.108.135.25410.108.135.255
1810.108.136.0/2110.108.136.1 – 10.108.143.25410.108.143.255
1910.108.144.0/2110.108.144.1 – 10.108.151.25410.108.151.255
2010.108.152.0/2110.108.152.1 – 10.108.159.25410.108.159.255
2110.108.160.0/2110.108.160.1 – 10.108.167.25410.108.167.255
2210.108.168.0/2110.108.168.1 – 10.108.175.25410.108.175.255
2310.108.176.0/2110.108.176.1 – 10.108.183.25410.108.183.255
2410.108.184.0/2110.108.184.1 – 10.108.191.25410.108.191.255
2510.108.192.0/2110.108.192.1 – 10.108.199.25410.108.199.255
2610.108.200.0/2110.108.200.1 – 10.108.207.25410.108.207.255
2710.108.208.0/2110.108.208.1 – 10.108.215.25410.108.215.255
2810.108.216.0/2110.108.216.1 – 10.108.223.25410.108.223.255
2910.108.224.0/2110.108.224.1 – 10.108.231.25410.108.231.255
3010.108.232.0/2110.108.232.1 – 10.108.239.25410.108.239.255
3110.108.240.0/2110.108.240.1 – 10.108.247.25410.108.247.255
3210.108.248.0/2110.108.248.1 – 10.108.255.25410.108.255.255
3310.109.0.0/2110.109.0.1 – 10.109.7.25410.109.7.255
3410.109.8.0/2110.109.8.1 – 10.109.15.25410.109.15.255
3510.109.16.0/2110.109.16.1 – 10.109.23.25410.109.23.255
3610.109.24.0/2110.109.24.1 – 10.109.31.25410.109.31.255
3710.109.32.0/2110.109.32.1 – 10.109.39.25410.109.39.255
3810.109.40.0/2110.109.40.1 – 10.109.47.25410.109.47.255
3910.109.48.0/2110.109.48.1 – 10.109.55.25410.109.55.255
4010.109.56.0/2110.109.56.1 – 10.109.63.25410.109.63.255
4110.109.64.0/2110.109.64.1 – 10.109.71.25410.109.71.255
4210.109.72.0/2110.109.72.1 – 10.109.79.25410.109.79.255
4310.109.80.0/2110.109.80.1 – 10.109.87.25410.109.87.255
4410.109.88.0/2110.109.88.1 – 10.109.95.25410.109.95.255
4510.109.96.0/2110.109.96.1 – 10.109.103.25410.109.103.255
4610.109.104.0/2110.109.104.1 – 10.109.111.25410.109.111.255
4710.109.112.0/2110.109.112.1 – 10.109.119.25410.109.119.255
4810.109.120.0/2110.109.120.1 – 10.109.127.25410.109.127.255
4910.109.128.0/2110.109.128.1 – 10.109.135.25410.109.135.255
5010.109.136.0/2110.109.136.1 – 10.109.143.25410.109.143.255
5110.109.144.0/2110.109.144.1 – 10.109.151.25410.109.151.255
5210.109.152.0/2110.109.152.1 – 10.109.159.25410.109.159.255
5310.109.160.0/2110.109.160.1 – 10.109.167.25410.109.167.255
5410.109.168.0/2110.109.168.1 – 10.109.175.25410.109.175.255
5510.109.176.0/2110.109.176.1 – 10.109.183.25410.109.183.255
5610.109.184.0/2110.109.184.1 – 10.109.191.25410.109.191.255
5710.109.192.0/2110.109.192.1 – 10.109.199.25410.109.199.255
5810.109.200.0/2110.109.200.1 – 10.109.207.25410.109.207.255
5910.109.208.0/2110.109.208.1 – 10.109.215.25410.109.215.255
6010.109.216.0/2110.109.216.1 – 10.109.223.25410.109.223.255
6110.109.224.0/2110.109.224.1 – 10.109.231.25410.109.231.255
6210.109.232.0/2110.109.232.1 – 10.109.239.25410.109.239.255
6310.109.240.0/2110.109.240.1 – 10.109.247.25410.109.247.255
6410.109.248.0/2110.109.248.1 – 10.109.255.25410.109.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /15
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,0701
/16255.255.0.065,53665,5342 split →
/17255.255.128.032,76832,7664 split →
/18255.255.192.016,38416,3828 split →
/19255.255.224.08,1928,19016 split →
/20255.255.240.04,0964,09432 split →
/21255.255.248.02,0482,04664 split →
/22255.255.252.01,0241,022128 split →
/23255.255.254.0512510256 split →
/24255.255.255.0256254512 split →
/25255.255.255.1281281261,024 split →
/26255.255.255.19264622,048 split →
/27255.255.255.22432304,096 split →
/28255.255.255.24016148,192 split →
/29255.255.255.2488616,384 split →
/30255.255.255.2524232,768 split →
/31255.255.255.2542265,536 split →
/32255.255.255.25511131,072 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →