ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.101.0.0/16
network10.101.0.0/16
broadcast10.101.255.255
first host10.101.0.1
last host10.101.255.254
subnet mask255.255.0.0
wildcard0.0.255.255
addresses65,536
usable hosts65,534
classA
ipcalc 10.101.0.0/16
address00001010.01100101.00000000.00000000
subnet mask11111111.11111111.00000000.00000000
network00001010.01100101.00000000.00000000
broadcast00001010.01100101.11111111.11111111
green = network part, grey = host part
hex0x0a650000
decimal174391296
reverse dns0.0.101.10.in-addr.arpa
ipv4-mapped::ffff:a65:0

/16 split into /22 · 64 subnets

close ×
#networkhost rangebroadcast
110.101.0.0/2210.101.0.1 – 10.101.3.25410.101.3.255
210.101.4.0/2210.101.4.1 – 10.101.7.25410.101.7.255
310.101.8.0/2210.101.8.1 – 10.101.11.25410.101.11.255
410.101.12.0/2210.101.12.1 – 10.101.15.25410.101.15.255
510.101.16.0/2210.101.16.1 – 10.101.19.25410.101.19.255
610.101.20.0/2210.101.20.1 – 10.101.23.25410.101.23.255
710.101.24.0/2210.101.24.1 – 10.101.27.25410.101.27.255
810.101.28.0/2210.101.28.1 – 10.101.31.25410.101.31.255
910.101.32.0/2210.101.32.1 – 10.101.35.25410.101.35.255
1010.101.36.0/2210.101.36.1 – 10.101.39.25410.101.39.255
1110.101.40.0/2210.101.40.1 – 10.101.43.25410.101.43.255
1210.101.44.0/2210.101.44.1 – 10.101.47.25410.101.47.255
1310.101.48.0/2210.101.48.1 – 10.101.51.25410.101.51.255
1410.101.52.0/2210.101.52.1 – 10.101.55.25410.101.55.255
1510.101.56.0/2210.101.56.1 – 10.101.59.25410.101.59.255
1610.101.60.0/2210.101.60.1 – 10.101.63.25410.101.63.255
1710.101.64.0/2210.101.64.1 – 10.101.67.25410.101.67.255
1810.101.68.0/2210.101.68.1 – 10.101.71.25410.101.71.255
1910.101.72.0/2210.101.72.1 – 10.101.75.25410.101.75.255
2010.101.76.0/2210.101.76.1 – 10.101.79.25410.101.79.255
2110.101.80.0/2210.101.80.1 – 10.101.83.25410.101.83.255
2210.101.84.0/2210.101.84.1 – 10.101.87.25410.101.87.255
2310.101.88.0/2210.101.88.1 – 10.101.91.25410.101.91.255
2410.101.92.0/2210.101.92.1 – 10.101.95.25410.101.95.255
2510.101.96.0/2210.101.96.1 – 10.101.99.25410.101.99.255
2610.101.100.0/2210.101.100.1 – 10.101.103.25410.101.103.255
2710.101.104.0/2210.101.104.1 – 10.101.107.25410.101.107.255
2810.101.108.0/2210.101.108.1 – 10.101.111.25410.101.111.255
2910.101.112.0/2210.101.112.1 – 10.101.115.25410.101.115.255
3010.101.116.0/2210.101.116.1 – 10.101.119.25410.101.119.255
3110.101.120.0/2210.101.120.1 – 10.101.123.25410.101.123.255
3210.101.124.0/2210.101.124.1 – 10.101.127.25410.101.127.255
3310.101.128.0/2210.101.128.1 – 10.101.131.25410.101.131.255
3410.101.132.0/2210.101.132.1 – 10.101.135.25410.101.135.255
3510.101.136.0/2210.101.136.1 – 10.101.139.25410.101.139.255
3610.101.140.0/2210.101.140.1 – 10.101.143.25410.101.143.255
3710.101.144.0/2210.101.144.1 – 10.101.147.25410.101.147.255
3810.101.148.0/2210.101.148.1 – 10.101.151.25410.101.151.255
3910.101.152.0/2210.101.152.1 – 10.101.155.25410.101.155.255
4010.101.156.0/2210.101.156.1 – 10.101.159.25410.101.159.255
4110.101.160.0/2210.101.160.1 – 10.101.163.25410.101.163.255
4210.101.164.0/2210.101.164.1 – 10.101.167.25410.101.167.255
4310.101.168.0/2210.101.168.1 – 10.101.171.25410.101.171.255
4410.101.172.0/2210.101.172.1 – 10.101.175.25410.101.175.255
4510.101.176.0/2210.101.176.1 – 10.101.179.25410.101.179.255
4610.101.180.0/2210.101.180.1 – 10.101.183.25410.101.183.255
4710.101.184.0/2210.101.184.1 – 10.101.187.25410.101.187.255
4810.101.188.0/2210.101.188.1 – 10.101.191.25410.101.191.255
4910.101.192.0/2210.101.192.1 – 10.101.195.25410.101.195.255
5010.101.196.0/2210.101.196.1 – 10.101.199.25410.101.199.255
5110.101.200.0/2210.101.200.1 – 10.101.203.25410.101.203.255
5210.101.204.0/2210.101.204.1 – 10.101.207.25410.101.207.255
5310.101.208.0/2210.101.208.1 – 10.101.211.25410.101.211.255
5410.101.212.0/2210.101.212.1 – 10.101.215.25410.101.215.255
5510.101.216.0/2210.101.216.1 – 10.101.219.25410.101.219.255
5610.101.220.0/2210.101.220.1 – 10.101.223.25410.101.223.255
5710.101.224.0/2210.101.224.1 – 10.101.227.25410.101.227.255
5810.101.228.0/2210.101.228.1 – 10.101.231.25410.101.231.255
5910.101.232.0/2210.101.232.1 – 10.101.235.25410.101.235.255
6010.101.236.0/2210.101.236.1 – 10.101.239.25410.101.239.255
6110.101.240.0/2210.101.240.1 – 10.101.243.25410.101.243.255
6210.101.244.0/2210.101.244.1 – 10.101.247.25410.101.247.255
6310.101.248.0/2210.101.248.1 – 10.101.251.25410.101.251.255
6410.101.252.0/2210.101.252.1 – 10.101.255.25410.101.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /16
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,5341
/17255.255.128.032,76832,7662 split →
/18255.255.192.016,38416,3824 split →
/19255.255.224.08,1928,1908 split →
/20255.255.240.04,0964,09416 split →
/21255.255.248.02,0482,04632 split →
/22255.255.252.01,0241,02264 split →
/23255.255.254.0512510128 split →
/24255.255.255.0256254256 split →
/25255.255.255.128128126512 split →
/26255.255.255.19264621,024 split →
/27255.255.255.22432302,048 split →
/28255.255.255.24016144,096 split →
/29255.255.255.248868,192 split →
/30255.255.255.2524216,384 split →
/31255.255.255.2542232,768 split →
/32255.255.255.2551165,536 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →