ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.1.216.0/22
network10.1.216.0/22
broadcast10.1.219.255
first host10.1.216.1
last host10.1.219.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.1.216.0/22
address00001010.00000001.11011000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00000001.11011000.00000000
broadcast00001010.00000001.11011011.11111111
green = network part, grey = host part
hex0x0a01d800
decimal167892992
reverse dns0.216.1.10.in-addr.arpa
ipv4-mapped::ffff:a01:d800

/22 split into /27 · 32 subnets

close ×
#networkhost rangebroadcast
110.1.216.0/2710.1.216.1 – 10.1.216.3010.1.216.31
210.1.216.32/2710.1.216.33 – 10.1.216.6210.1.216.63
310.1.216.64/2710.1.216.65 – 10.1.216.9410.1.216.95
410.1.216.96/2710.1.216.97 – 10.1.216.12610.1.216.127
510.1.216.128/2710.1.216.129 – 10.1.216.15810.1.216.159
610.1.216.160/2710.1.216.161 – 10.1.216.19010.1.216.191
710.1.216.192/2710.1.216.193 – 10.1.216.22210.1.216.223
810.1.216.224/2710.1.216.225 – 10.1.216.25410.1.216.255
910.1.217.0/2710.1.217.1 – 10.1.217.3010.1.217.31
1010.1.217.32/2710.1.217.33 – 10.1.217.6210.1.217.63
1110.1.217.64/2710.1.217.65 – 10.1.217.9410.1.217.95
1210.1.217.96/2710.1.217.97 – 10.1.217.12610.1.217.127
1310.1.217.128/2710.1.217.129 – 10.1.217.15810.1.217.159
1410.1.217.160/2710.1.217.161 – 10.1.217.19010.1.217.191
1510.1.217.192/2710.1.217.193 – 10.1.217.22210.1.217.223
1610.1.217.224/2710.1.217.225 – 10.1.217.25410.1.217.255
1710.1.218.0/2710.1.218.1 – 10.1.218.3010.1.218.31
1810.1.218.32/2710.1.218.33 – 10.1.218.6210.1.218.63
1910.1.218.64/2710.1.218.65 – 10.1.218.9410.1.218.95
2010.1.218.96/2710.1.218.97 – 10.1.218.12610.1.218.127
2110.1.218.128/2710.1.218.129 – 10.1.218.15810.1.218.159
2210.1.218.160/2710.1.218.161 – 10.1.218.19010.1.218.191
2310.1.218.192/2710.1.218.193 – 10.1.218.22210.1.218.223
2410.1.218.224/2710.1.218.225 – 10.1.218.25410.1.218.255
2510.1.219.0/2710.1.219.1 – 10.1.219.3010.1.219.31
2610.1.219.32/2710.1.219.33 – 10.1.219.6210.1.219.63
2710.1.219.64/2710.1.219.65 – 10.1.219.9410.1.219.95
2810.1.219.96/2710.1.219.97 – 10.1.219.12610.1.219.127
2910.1.219.128/2710.1.219.129 – 10.1.219.15810.1.219.159
3010.1.219.160/2710.1.219.161 – 10.1.219.19010.1.219.191
3110.1.219.192/2710.1.219.193 – 10.1.219.22210.1.219.223
3210.1.219.224/2710.1.219.225 – 10.1.219.25410.1.219.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →