ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.1.167.112/28
network10.1.167.112/28
broadcast10.1.167.127
first host10.1.167.113
last host10.1.167.126
subnet mask255.255.255.240
wildcard0.0.0.15
addresses16
usable hosts14
classA
ipcalc 10.1.167.112/28
address00001010.00000001.10100111.01110000
subnet mask11111111.11111111.11111111.11110000
network00001010.00000001.10100111.01110000
broadcast00001010.00000001.10100111.01111111
green = network part, grey = host part
hex0x0a01a770
decimal167880560
reverse dns112.167.1.10.in-addr.arpa
ipv4-mapped::ffff:a01:a770

/28 split into /32 · 16 subnets

close ×
#networkhost rangebroadcast
110.1.167.112/3210.1.167.112 – 10.1.167.11210.1.167.112
210.1.167.113/3210.1.167.113 – 10.1.167.11310.1.167.113
310.1.167.114/3210.1.167.114 – 10.1.167.11410.1.167.114
410.1.167.115/3210.1.167.115 – 10.1.167.11510.1.167.115
510.1.167.116/3210.1.167.116 – 10.1.167.11610.1.167.116
610.1.167.117/3210.1.167.117 – 10.1.167.11710.1.167.117
710.1.167.118/3210.1.167.118 – 10.1.167.11810.1.167.118
810.1.167.119/3210.1.167.119 – 10.1.167.11910.1.167.119
910.1.167.120/3210.1.167.120 – 10.1.167.12010.1.167.120
1010.1.167.121/3210.1.167.121 – 10.1.167.12110.1.167.121
1110.1.167.122/3210.1.167.122 – 10.1.167.12210.1.167.122
1210.1.167.123/3210.1.167.123 – 10.1.167.12310.1.167.123
1310.1.167.124/3210.1.167.124 – 10.1.167.12410.1.167.124
1410.1.167.125/3210.1.167.125 – 10.1.167.12510.1.167.125
1510.1.167.126/3210.1.167.126 – 10.1.167.12610.1.167.126
1610.1.167.127/3210.1.167.127 – 10.1.167.12710.1.167.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /28
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.2243230-
/28255.255.255.24016141
/29255.255.255.248862 split →
/30255.255.255.252424 split →
/31255.255.255.254228 split →
/32255.255.255.2551116 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →