ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.1.160.0/22
network10.1.160.0/22
broadcast10.1.163.255
first host10.1.160.1
last host10.1.163.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.1.160.0/22
address00001010.00000001.10100000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00000001.10100000.00000000
broadcast00001010.00000001.10100011.11111111
green = network part, grey = host part
hex0x0a01a000
decimal167878656
reverse dns0.160.1.10.in-addr.arpa
ipv4-mapped::ffff:a01:a000

/22 split into /27 · 32 subnets

close ×
#networkhost rangebroadcast
110.1.160.0/2710.1.160.1 – 10.1.160.3010.1.160.31
210.1.160.32/2710.1.160.33 – 10.1.160.6210.1.160.63
310.1.160.64/2710.1.160.65 – 10.1.160.9410.1.160.95
410.1.160.96/2710.1.160.97 – 10.1.160.12610.1.160.127
510.1.160.128/2710.1.160.129 – 10.1.160.15810.1.160.159
610.1.160.160/2710.1.160.161 – 10.1.160.19010.1.160.191
710.1.160.192/2710.1.160.193 – 10.1.160.22210.1.160.223
810.1.160.224/2710.1.160.225 – 10.1.160.25410.1.160.255
910.1.161.0/2710.1.161.1 – 10.1.161.3010.1.161.31
1010.1.161.32/2710.1.161.33 – 10.1.161.6210.1.161.63
1110.1.161.64/2710.1.161.65 – 10.1.161.9410.1.161.95
1210.1.161.96/2710.1.161.97 – 10.1.161.12610.1.161.127
1310.1.161.128/2710.1.161.129 – 10.1.161.15810.1.161.159
1410.1.161.160/2710.1.161.161 – 10.1.161.19010.1.161.191
1510.1.161.192/2710.1.161.193 – 10.1.161.22210.1.161.223
1610.1.161.224/2710.1.161.225 – 10.1.161.25410.1.161.255
1710.1.162.0/2710.1.162.1 – 10.1.162.3010.1.162.31
1810.1.162.32/2710.1.162.33 – 10.1.162.6210.1.162.63
1910.1.162.64/2710.1.162.65 – 10.1.162.9410.1.162.95
2010.1.162.96/2710.1.162.97 – 10.1.162.12610.1.162.127
2110.1.162.128/2710.1.162.129 – 10.1.162.15810.1.162.159
2210.1.162.160/2710.1.162.161 – 10.1.162.19010.1.162.191
2310.1.162.192/2710.1.162.193 – 10.1.162.22210.1.162.223
2410.1.162.224/2710.1.162.225 – 10.1.162.25410.1.162.255
2510.1.163.0/2710.1.163.1 – 10.1.163.3010.1.163.31
2610.1.163.32/2710.1.163.33 – 10.1.163.6210.1.163.63
2710.1.163.64/2710.1.163.65 – 10.1.163.9410.1.163.95
2810.1.163.96/2710.1.163.97 – 10.1.163.12610.1.163.127
2910.1.163.128/2710.1.163.129 – 10.1.163.15810.1.163.159
3010.1.163.160/2710.1.163.161 – 10.1.163.19010.1.163.191
3110.1.163.192/2710.1.163.193 – 10.1.163.22210.1.163.223
3210.1.163.224/2710.1.163.225 – 10.1.163.25410.1.163.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →