ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.0.9.0/24
network10.0.9.0/24
broadcast10.0.9.255
first host10.0.9.1
last host10.0.9.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.0.9.0/24
address00001010.00000000.00001001.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000000.00001001.00000000
broadcast00001010.00000000.00001001.11111111
green = network part, grey = host part
hex0x0a000900
decimal167774464
reverse dns0.9.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:900

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.0.9.0/3010.0.9.1 – 10.0.9.210.0.9.3
210.0.9.4/3010.0.9.5 – 10.0.9.610.0.9.7
310.0.9.8/3010.0.9.9 – 10.0.9.1010.0.9.11
410.0.9.12/3010.0.9.13 – 10.0.9.1410.0.9.15
510.0.9.16/3010.0.9.17 – 10.0.9.1810.0.9.19
610.0.9.20/3010.0.9.21 – 10.0.9.2210.0.9.23
710.0.9.24/3010.0.9.25 – 10.0.9.2610.0.9.27
810.0.9.28/3010.0.9.29 – 10.0.9.3010.0.9.31
910.0.9.32/3010.0.9.33 – 10.0.9.3410.0.9.35
1010.0.9.36/3010.0.9.37 – 10.0.9.3810.0.9.39
1110.0.9.40/3010.0.9.41 – 10.0.9.4210.0.9.43
1210.0.9.44/3010.0.9.45 – 10.0.9.4610.0.9.47
1310.0.9.48/3010.0.9.49 – 10.0.9.5010.0.9.51
1410.0.9.52/3010.0.9.53 – 10.0.9.5410.0.9.55
1510.0.9.56/3010.0.9.57 – 10.0.9.5810.0.9.59
1610.0.9.60/3010.0.9.61 – 10.0.9.6210.0.9.63
1710.0.9.64/3010.0.9.65 – 10.0.9.6610.0.9.67
1810.0.9.68/3010.0.9.69 – 10.0.9.7010.0.9.71
1910.0.9.72/3010.0.9.73 – 10.0.9.7410.0.9.75
2010.0.9.76/3010.0.9.77 – 10.0.9.7810.0.9.79
2110.0.9.80/3010.0.9.81 – 10.0.9.8210.0.9.83
2210.0.9.84/3010.0.9.85 – 10.0.9.8610.0.9.87
2310.0.9.88/3010.0.9.89 – 10.0.9.9010.0.9.91
2410.0.9.92/3010.0.9.93 – 10.0.9.9410.0.9.95
2510.0.9.96/3010.0.9.97 – 10.0.9.9810.0.9.99
2610.0.9.100/3010.0.9.101 – 10.0.9.10210.0.9.103
2710.0.9.104/3010.0.9.105 – 10.0.9.10610.0.9.107
2810.0.9.108/3010.0.9.109 – 10.0.9.11010.0.9.111
2910.0.9.112/3010.0.9.113 – 10.0.9.11410.0.9.115
3010.0.9.116/3010.0.9.117 – 10.0.9.11810.0.9.119
3110.0.9.120/3010.0.9.121 – 10.0.9.12210.0.9.123
3210.0.9.124/3010.0.9.125 – 10.0.9.12610.0.9.127
3310.0.9.128/3010.0.9.129 – 10.0.9.13010.0.9.131
3410.0.9.132/3010.0.9.133 – 10.0.9.13410.0.9.135
3510.0.9.136/3010.0.9.137 – 10.0.9.13810.0.9.139
3610.0.9.140/3010.0.9.141 – 10.0.9.14210.0.9.143
3710.0.9.144/3010.0.9.145 – 10.0.9.14610.0.9.147
3810.0.9.148/3010.0.9.149 – 10.0.9.15010.0.9.151
3910.0.9.152/3010.0.9.153 – 10.0.9.15410.0.9.155
4010.0.9.156/3010.0.9.157 – 10.0.9.15810.0.9.159
4110.0.9.160/3010.0.9.161 – 10.0.9.16210.0.9.163
4210.0.9.164/3010.0.9.165 – 10.0.9.16610.0.9.167
4310.0.9.168/3010.0.9.169 – 10.0.9.17010.0.9.171
4410.0.9.172/3010.0.9.173 – 10.0.9.17410.0.9.175
4510.0.9.176/3010.0.9.177 – 10.0.9.17810.0.9.179
4610.0.9.180/3010.0.9.181 – 10.0.9.18210.0.9.183
4710.0.9.184/3010.0.9.185 – 10.0.9.18610.0.9.187
4810.0.9.188/3010.0.9.189 – 10.0.9.19010.0.9.191
4910.0.9.192/3010.0.9.193 – 10.0.9.19410.0.9.195
5010.0.9.196/3010.0.9.197 – 10.0.9.19810.0.9.199
5110.0.9.200/3010.0.9.201 – 10.0.9.20210.0.9.203
5210.0.9.204/3010.0.9.205 – 10.0.9.20610.0.9.207
5310.0.9.208/3010.0.9.209 – 10.0.9.21010.0.9.211
5410.0.9.212/3010.0.9.213 – 10.0.9.21410.0.9.215
5510.0.9.216/3010.0.9.217 – 10.0.9.21810.0.9.219
5610.0.9.220/3010.0.9.221 – 10.0.9.22210.0.9.223
5710.0.9.224/3010.0.9.225 – 10.0.9.22610.0.9.227
5810.0.9.228/3010.0.9.229 – 10.0.9.23010.0.9.231
5910.0.9.232/3010.0.9.233 – 10.0.9.23410.0.9.235
6010.0.9.236/3010.0.9.237 – 10.0.9.23810.0.9.239
6110.0.9.240/3010.0.9.241 – 10.0.9.24210.0.9.243
6210.0.9.244/3010.0.9.245 – 10.0.9.24610.0.9.247
6310.0.9.248/3010.0.9.249 – 10.0.9.25010.0.9.251
6410.0.9.252/3010.0.9.253 – 10.0.9.25410.0.9.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →