ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.84.0/22
network10.0.84.0/22
broadcast10.0.87.255
first host10.0.84.1
last host10.0.87.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.0.84.0/22
address00001010.00000000.01010100.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00000000.01010100.00000000
broadcast00001010.00000000.01010111.11111111
green = network part, grey = host part
hex0x0a005400
decimal167793664
reverse dns0.84.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:5400

/22 split into /26 · 16 subnets

close ×
#networkhost rangebroadcast
110.0.84.0/2610.0.84.1 – 10.0.84.6210.0.84.63
210.0.84.64/2610.0.84.65 – 10.0.84.12610.0.84.127
310.0.84.128/2610.0.84.129 – 10.0.84.19010.0.84.191
410.0.84.192/2610.0.84.193 – 10.0.84.25410.0.84.255
510.0.85.0/2610.0.85.1 – 10.0.85.6210.0.85.63
610.0.85.64/2610.0.85.65 – 10.0.85.12610.0.85.127
710.0.85.128/2610.0.85.129 – 10.0.85.19010.0.85.191
810.0.85.192/2610.0.85.193 – 10.0.85.25410.0.85.255
910.0.86.0/2610.0.86.1 – 10.0.86.6210.0.86.63
1010.0.86.64/2610.0.86.65 – 10.0.86.12610.0.86.127
1110.0.86.128/2610.0.86.129 – 10.0.86.19010.0.86.191
1210.0.86.192/2610.0.86.193 – 10.0.86.25410.0.86.255
1310.0.87.0/2610.0.87.1 – 10.0.87.6210.0.87.63
1410.0.87.64/2610.0.87.65 – 10.0.87.12610.0.87.127
1510.0.87.128/2610.0.87.129 – 10.0.87.19010.0.87.191
1610.0.87.192/2610.0.87.193 – 10.0.87.25410.0.87.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →