ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.80.0/23
network10.0.80.0/23
broadcast10.0.81.255
first host10.0.80.1
last host10.0.81.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.0.80.0/23
address00001010.00000000.01010000.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00000000.01010000.00000000
broadcast00001010.00000000.01010001.11111111
green = network part, grey = host part
hex0x0a005000
decimal167792640
reverse dns0.80.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:5000

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.80.0/2810.0.80.1 – 10.0.80.1410.0.80.15
210.0.80.16/2810.0.80.17 – 10.0.80.3010.0.80.31
310.0.80.32/2810.0.80.33 – 10.0.80.4610.0.80.47
410.0.80.48/2810.0.80.49 – 10.0.80.6210.0.80.63
510.0.80.64/2810.0.80.65 – 10.0.80.7810.0.80.79
610.0.80.80/2810.0.80.81 – 10.0.80.9410.0.80.95
710.0.80.96/2810.0.80.97 – 10.0.80.11010.0.80.111
810.0.80.112/2810.0.80.113 – 10.0.80.12610.0.80.127
910.0.80.128/2810.0.80.129 – 10.0.80.14210.0.80.143
1010.0.80.144/2810.0.80.145 – 10.0.80.15810.0.80.159
1110.0.80.160/2810.0.80.161 – 10.0.80.17410.0.80.175
1210.0.80.176/2810.0.80.177 – 10.0.80.19010.0.80.191
1310.0.80.192/2810.0.80.193 – 10.0.80.20610.0.80.207
1410.0.80.208/2810.0.80.209 – 10.0.80.22210.0.80.223
1510.0.80.224/2810.0.80.225 – 10.0.80.23810.0.80.239
1610.0.80.240/2810.0.80.241 – 10.0.80.25410.0.80.255
1710.0.81.0/2810.0.81.1 – 10.0.81.1410.0.81.15
1810.0.81.16/2810.0.81.17 – 10.0.81.3010.0.81.31
1910.0.81.32/2810.0.81.33 – 10.0.81.4610.0.81.47
2010.0.81.48/2810.0.81.49 – 10.0.81.6210.0.81.63
2110.0.81.64/2810.0.81.65 – 10.0.81.7810.0.81.79
2210.0.81.80/2810.0.81.81 – 10.0.81.9410.0.81.95
2310.0.81.96/2810.0.81.97 – 10.0.81.11010.0.81.111
2410.0.81.112/2810.0.81.113 – 10.0.81.12610.0.81.127
2510.0.81.128/2810.0.81.129 – 10.0.81.14210.0.81.143
2610.0.81.144/2810.0.81.145 – 10.0.81.15810.0.81.159
2710.0.81.160/2810.0.81.161 – 10.0.81.17410.0.81.175
2810.0.81.176/2810.0.81.177 – 10.0.81.19010.0.81.191
2910.0.81.192/2810.0.81.193 – 10.0.81.20610.0.81.207
3010.0.81.208/2810.0.81.209 – 10.0.81.22210.0.81.223
3110.0.81.224/2810.0.81.225 – 10.0.81.23810.0.81.239
3210.0.81.240/2810.0.81.241 – 10.0.81.25410.0.81.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →