ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.59.192/26
network10.0.59.192/26
broadcast10.0.59.255
first host10.0.59.193
last host10.0.59.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.0.59.192/26
address00001010.00000000.00111011.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000000.00111011.11000000
broadcast00001010.00000000.00111011.11111111
green = network part, grey = host part
hex0x0a003bc0
decimal167787456
reverse dns192.59.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:3bc0

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.59.192/3110.0.59.192 – 10.0.59.19310.0.59.193
210.0.59.194/3110.0.59.194 – 10.0.59.19510.0.59.195
310.0.59.196/3110.0.59.196 – 10.0.59.19710.0.59.197
410.0.59.198/3110.0.59.198 – 10.0.59.19910.0.59.199
510.0.59.200/3110.0.59.200 – 10.0.59.20110.0.59.201
610.0.59.202/3110.0.59.202 – 10.0.59.20310.0.59.203
710.0.59.204/3110.0.59.204 – 10.0.59.20510.0.59.205
810.0.59.206/3110.0.59.206 – 10.0.59.20710.0.59.207
910.0.59.208/3110.0.59.208 – 10.0.59.20910.0.59.209
1010.0.59.210/3110.0.59.210 – 10.0.59.21110.0.59.211
1110.0.59.212/3110.0.59.212 – 10.0.59.21310.0.59.213
1210.0.59.214/3110.0.59.214 – 10.0.59.21510.0.59.215
1310.0.59.216/3110.0.59.216 – 10.0.59.21710.0.59.217
1410.0.59.218/3110.0.59.218 – 10.0.59.21910.0.59.219
1510.0.59.220/3110.0.59.220 – 10.0.59.22110.0.59.221
1610.0.59.222/3110.0.59.222 – 10.0.59.22310.0.59.223
1710.0.59.224/3110.0.59.224 – 10.0.59.22510.0.59.225
1810.0.59.226/3110.0.59.226 – 10.0.59.22710.0.59.227
1910.0.59.228/3110.0.59.228 – 10.0.59.22910.0.59.229
2010.0.59.230/3110.0.59.230 – 10.0.59.23110.0.59.231
2110.0.59.232/3110.0.59.232 – 10.0.59.23310.0.59.233
2210.0.59.234/3110.0.59.234 – 10.0.59.23510.0.59.235
2310.0.59.236/3110.0.59.236 – 10.0.59.23710.0.59.237
2410.0.59.238/3110.0.59.238 – 10.0.59.23910.0.59.239
2510.0.59.240/3110.0.59.240 – 10.0.59.24110.0.59.241
2610.0.59.242/3110.0.59.242 – 10.0.59.24310.0.59.243
2710.0.59.244/3110.0.59.244 – 10.0.59.24510.0.59.245
2810.0.59.246/3110.0.59.246 – 10.0.59.24710.0.59.247
2910.0.59.248/3110.0.59.248 – 10.0.59.24910.0.59.249
3010.0.59.250/3110.0.59.250 – 10.0.59.25110.0.59.251
3110.0.59.252/3110.0.59.252 – 10.0.59.25310.0.59.253
3210.0.59.254/3110.0.59.254 – 10.0.59.25510.0.59.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →