ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.54.128/25
network10.0.54.128/25
broadcast10.0.54.255
first host10.0.54.129
last host10.0.54.254
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.0.54.128/25
address00001010.00000000.00110110.10000000
subnet mask11111111.11111111.11111111.10000000
network00001010.00000000.00110110.10000000
broadcast00001010.00000000.00110110.11111111
green = network part, grey = host part
hex0x0a003680
decimal167786112
reverse dns128.54.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:3680

/25 split into /30 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.54.128/3010.0.54.129 – 10.0.54.13010.0.54.131
210.0.54.132/3010.0.54.133 – 10.0.54.13410.0.54.135
310.0.54.136/3010.0.54.137 – 10.0.54.13810.0.54.139
410.0.54.140/3010.0.54.141 – 10.0.54.14210.0.54.143
510.0.54.144/3010.0.54.145 – 10.0.54.14610.0.54.147
610.0.54.148/3010.0.54.149 – 10.0.54.15010.0.54.151
710.0.54.152/3010.0.54.153 – 10.0.54.15410.0.54.155
810.0.54.156/3010.0.54.157 – 10.0.54.15810.0.54.159
910.0.54.160/3010.0.54.161 – 10.0.54.16210.0.54.163
1010.0.54.164/3010.0.54.165 – 10.0.54.16610.0.54.167
1110.0.54.168/3010.0.54.169 – 10.0.54.17010.0.54.171
1210.0.54.172/3010.0.54.173 – 10.0.54.17410.0.54.175
1310.0.54.176/3010.0.54.177 – 10.0.54.17810.0.54.179
1410.0.54.180/3010.0.54.181 – 10.0.54.18210.0.54.183
1510.0.54.184/3010.0.54.185 – 10.0.54.18610.0.54.187
1610.0.54.188/3010.0.54.189 – 10.0.54.19010.0.54.191
1710.0.54.192/3010.0.54.193 – 10.0.54.19410.0.54.195
1810.0.54.196/3010.0.54.197 – 10.0.54.19810.0.54.199
1910.0.54.200/3010.0.54.201 – 10.0.54.20210.0.54.203
2010.0.54.204/3010.0.54.205 – 10.0.54.20610.0.54.207
2110.0.54.208/3010.0.54.209 – 10.0.54.21010.0.54.211
2210.0.54.212/3010.0.54.213 – 10.0.54.21410.0.54.215
2310.0.54.216/3010.0.54.217 – 10.0.54.21810.0.54.219
2410.0.54.220/3010.0.54.221 – 10.0.54.22210.0.54.223
2510.0.54.224/3010.0.54.225 – 10.0.54.22610.0.54.227
2610.0.54.228/3010.0.54.229 – 10.0.54.23010.0.54.231
2710.0.54.232/3010.0.54.233 – 10.0.54.23410.0.54.235
2810.0.54.236/3010.0.54.237 – 10.0.54.23810.0.54.239
2910.0.54.240/3010.0.54.241 – 10.0.54.24210.0.54.243
3010.0.54.244/3010.0.54.245 – 10.0.54.24610.0.54.247
3110.0.54.248/3010.0.54.249 – 10.0.54.25010.0.54.251
3210.0.54.252/3010.0.54.253 – 10.0.54.25410.0.54.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →