ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.50.192/26
network10.0.50.192/26
broadcast10.0.50.255
first host10.0.50.193
last host10.0.50.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.0.50.192/26
address00001010.00000000.00110010.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000000.00110010.11000000
broadcast00001010.00000000.00110010.11111111
green = network part, grey = host part
hex0x0a0032c0
decimal167785152
reverse dns192.50.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:32c0

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.50.192/3110.0.50.192 – 10.0.50.19310.0.50.193
210.0.50.194/3110.0.50.194 – 10.0.50.19510.0.50.195
310.0.50.196/3110.0.50.196 – 10.0.50.19710.0.50.197
410.0.50.198/3110.0.50.198 – 10.0.50.19910.0.50.199
510.0.50.200/3110.0.50.200 – 10.0.50.20110.0.50.201
610.0.50.202/3110.0.50.202 – 10.0.50.20310.0.50.203
710.0.50.204/3110.0.50.204 – 10.0.50.20510.0.50.205
810.0.50.206/3110.0.50.206 – 10.0.50.20710.0.50.207
910.0.50.208/3110.0.50.208 – 10.0.50.20910.0.50.209
1010.0.50.210/3110.0.50.210 – 10.0.50.21110.0.50.211
1110.0.50.212/3110.0.50.212 – 10.0.50.21310.0.50.213
1210.0.50.214/3110.0.50.214 – 10.0.50.21510.0.50.215
1310.0.50.216/3110.0.50.216 – 10.0.50.21710.0.50.217
1410.0.50.218/3110.0.50.218 – 10.0.50.21910.0.50.219
1510.0.50.220/3110.0.50.220 – 10.0.50.22110.0.50.221
1610.0.50.222/3110.0.50.222 – 10.0.50.22310.0.50.223
1710.0.50.224/3110.0.50.224 – 10.0.50.22510.0.50.225
1810.0.50.226/3110.0.50.226 – 10.0.50.22710.0.50.227
1910.0.50.228/3110.0.50.228 – 10.0.50.22910.0.50.229
2010.0.50.230/3110.0.50.230 – 10.0.50.23110.0.50.231
2110.0.50.232/3110.0.50.232 – 10.0.50.23310.0.50.233
2210.0.50.234/3110.0.50.234 – 10.0.50.23510.0.50.235
2310.0.50.236/3110.0.50.236 – 10.0.50.23710.0.50.237
2410.0.50.238/3110.0.50.238 – 10.0.50.23910.0.50.239
2510.0.50.240/3110.0.50.240 – 10.0.50.24110.0.50.241
2610.0.50.242/3110.0.50.242 – 10.0.50.24310.0.50.243
2710.0.50.244/3110.0.50.244 – 10.0.50.24510.0.50.245
2810.0.50.246/3110.0.50.246 – 10.0.50.24710.0.50.247
2910.0.50.248/3110.0.50.248 – 10.0.50.24910.0.50.249
3010.0.50.250/3110.0.50.250 – 10.0.50.25110.0.50.251
3110.0.50.252/3110.0.50.252 – 10.0.50.25310.0.50.253
3210.0.50.254/3110.0.50.254 – 10.0.50.25510.0.50.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →