IPv4 Subnet Calculator
Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.
private IP (RFC 1918)10.0.5.128/26
network10.0.5.128/26
broadcast10.0.5.191
first host10.0.5.129
last host10.0.5.190
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.0.5.128/26
address00001010.00000000.00000101.10000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000000.00000101.10000000
broadcast00001010.00000000.00000101.10111111
green = network part, grey = host part
hex0x0a000580
decimal167773568
reverse dns128.5.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:580
/26 split into /31 · 32 subnets
close ×| # | network | host range | broadcast |
|---|---|---|---|
| 1 | 10.0.5.128/31 | 10.0.5.128 – 10.0.5.129 | 10.0.5.129 |
| 2 | 10.0.5.130/31 | 10.0.5.130 – 10.0.5.131 | 10.0.5.131 |
| 3 | 10.0.5.132/31 | 10.0.5.132 – 10.0.5.133 | 10.0.5.133 |
| 4 | 10.0.5.134/31 | 10.0.5.134 – 10.0.5.135 | 10.0.5.135 |
| 5 | 10.0.5.136/31 | 10.0.5.136 – 10.0.5.137 | 10.0.5.137 |
| 6 | 10.0.5.138/31 | 10.0.5.138 – 10.0.5.139 | 10.0.5.139 |
| 7 | 10.0.5.140/31 | 10.0.5.140 – 10.0.5.141 | 10.0.5.141 |
| 8 | 10.0.5.142/31 | 10.0.5.142 – 10.0.5.143 | 10.0.5.143 |
| 9 | 10.0.5.144/31 | 10.0.5.144 – 10.0.5.145 | 10.0.5.145 |
| 10 | 10.0.5.146/31 | 10.0.5.146 – 10.0.5.147 | 10.0.5.147 |
| 11 | 10.0.5.148/31 | 10.0.5.148 – 10.0.5.149 | 10.0.5.149 |
| 12 | 10.0.5.150/31 | 10.0.5.150 – 10.0.5.151 | 10.0.5.151 |
| 13 | 10.0.5.152/31 | 10.0.5.152 – 10.0.5.153 | 10.0.5.153 |
| 14 | 10.0.5.154/31 | 10.0.5.154 – 10.0.5.155 | 10.0.5.155 |
| 15 | 10.0.5.156/31 | 10.0.5.156 – 10.0.5.157 | 10.0.5.157 |
| 16 | 10.0.5.158/31 | 10.0.5.158 – 10.0.5.159 | 10.0.5.159 |
| 17 | 10.0.5.160/31 | 10.0.5.160 – 10.0.5.161 | 10.0.5.161 |
| 18 | 10.0.5.162/31 | 10.0.5.162 – 10.0.5.163 | 10.0.5.163 |
| 19 | 10.0.5.164/31 | 10.0.5.164 – 10.0.5.165 | 10.0.5.165 |
| 20 | 10.0.5.166/31 | 10.0.5.166 – 10.0.5.167 | 10.0.5.167 |
| 21 | 10.0.5.168/31 | 10.0.5.168 – 10.0.5.169 | 10.0.5.169 |
| 22 | 10.0.5.170/31 | 10.0.5.170 – 10.0.5.171 | 10.0.5.171 |
| 23 | 10.0.5.172/31 | 10.0.5.172 – 10.0.5.173 | 10.0.5.173 |
| 24 | 10.0.5.174/31 | 10.0.5.174 – 10.0.5.175 | 10.0.5.175 |
| 25 | 10.0.5.176/31 | 10.0.5.176 – 10.0.5.177 | 10.0.5.177 |
| 26 | 10.0.5.178/31 | 10.0.5.178 – 10.0.5.179 | 10.0.5.179 |
| 27 | 10.0.5.180/31 | 10.0.5.180 – 10.0.5.181 | 10.0.5.181 |
| 28 | 10.0.5.182/31 | 10.0.5.182 – 10.0.5.183 | 10.0.5.183 |
| 29 | 10.0.5.184/31 | 10.0.5.184 – 10.0.5.185 | 10.0.5.185 |
| 30 | 10.0.5.186/31 | 10.0.5.186 – 10.0.5.187 | 10.0.5.187 |
| 31 | 10.0.5.188/31 | 10.0.5.188 – 10.0.5.189 | 10.0.5.189 |
| 32 | 10.0.5.190/31 | 10.0.5.190 – 10.0.5.191 | 10.0.5.191 |
01 / table
IPv4 CIDR prefix table.
Click a prefix longer than your network to split it into subnets.
| prefix | subnet mask | addresses | hosts | in your /26 |
|---|---|---|---|---|
| /0 | 0.0.0.0 | 4,294,967,296 | 4,294,967,294 | - |
| /1 | 128.0.0.0 | 2,147,483,648 | 2,147,483,646 | - |
| /2 | 192.0.0.0 | 1,073,741,824 | 1,073,741,822 | - |
| /3 | 224.0.0.0 | 536,870,912 | 536,870,910 | - |
| /4 | 240.0.0.0 | 268,435,456 | 268,435,454 | - |
| /5 | 248.0.0.0 | 134,217,728 | 134,217,726 | - |
| /6 | 252.0.0.0 | 67,108,864 | 67,108,862 | - |
| /7 | 254.0.0.0 | 33,554,432 | 33,554,430 | - |
| /8 | 255.0.0.0 | 16,777,216 | 16,777,214 | - |
| /9 | 255.128.0.0 | 8,388,608 | 8,388,606 | - |
| /10 | 255.192.0.0 | 4,194,304 | 4,194,302 | - |
| /11 | 255.224.0.0 | 2,097,152 | 2,097,150 | - |
| /12 | 255.240.0.0 | 1,048,576 | 1,048,574 | - |
| /13 | 255.248.0.0 | 524,288 | 524,286 | - |
| /14 | 255.252.0.0 | 262,144 | 262,142 | - |
| /15 | 255.254.0.0 | 131,072 | 131,070 | - |
| /16 | 255.255.0.0 | 65,536 | 65,534 | - |
| /17 | 255.255.128.0 | 32,768 | 32,766 | - |
| /18 | 255.255.192.0 | 16,384 | 16,382 | - |
| /19 | 255.255.224.0 | 8,192 | 8,190 | - |
| /20 | 255.255.240.0 | 4,096 | 4,094 | - |
| /21 | 255.255.248.0 | 2,048 | 2,046 | - |
| /22 | 255.255.252.0 | 1,024 | 1,022 | - |
| /23 | 255.255.254.0 | 512 | 510 | - |
| /24 | 255.255.255.0 | 256 | 254 | - |
| /25 | 255.255.255.128 | 128 | 126 | - |
| /26 | 255.255.255.192 | 64 | 62 | 1 |
| /27 | 255.255.255.224 | 32 | 30 | 2 split → |
| /28 | 255.255.255.240 | 16 | 14 | 4 split → |
| /29 | 255.255.255.248 | 8 | 6 | 8 split → |
| /30 | 255.255.255.252 | 4 | 2 | 16 split → |
| /31 | 255.255.255.254 | 2 | 2 | 32 split → |
| /32 | 255.255.255.255 | 1 | 1 | 64 split → |
02 / faq
About this calculator.
How do I use this subnet calculator?
▼
Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.
Why are usable hosts always 2 fewer?
▼
The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.
Can I use it from a terminal?
▼
Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.