ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.34.0/23
network10.0.34.0/23
broadcast10.0.35.255
first host10.0.34.1
last host10.0.35.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.0.34.0/23
address00001010.00000000.00100010.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00000000.00100010.00000000
broadcast00001010.00000000.00100011.11111111
green = network part, grey = host part
hex0x0a002200
decimal167780864
reverse dns0.34.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:2200

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.34.0/2810.0.34.1 – 10.0.34.1410.0.34.15
210.0.34.16/2810.0.34.17 – 10.0.34.3010.0.34.31
310.0.34.32/2810.0.34.33 – 10.0.34.4610.0.34.47
410.0.34.48/2810.0.34.49 – 10.0.34.6210.0.34.63
510.0.34.64/2810.0.34.65 – 10.0.34.7810.0.34.79
610.0.34.80/2810.0.34.81 – 10.0.34.9410.0.34.95
710.0.34.96/2810.0.34.97 – 10.0.34.11010.0.34.111
810.0.34.112/2810.0.34.113 – 10.0.34.12610.0.34.127
910.0.34.128/2810.0.34.129 – 10.0.34.14210.0.34.143
1010.0.34.144/2810.0.34.145 – 10.0.34.15810.0.34.159
1110.0.34.160/2810.0.34.161 – 10.0.34.17410.0.34.175
1210.0.34.176/2810.0.34.177 – 10.0.34.19010.0.34.191
1310.0.34.192/2810.0.34.193 – 10.0.34.20610.0.34.207
1410.0.34.208/2810.0.34.209 – 10.0.34.22210.0.34.223
1510.0.34.224/2810.0.34.225 – 10.0.34.23810.0.34.239
1610.0.34.240/2810.0.34.241 – 10.0.34.25410.0.34.255
1710.0.35.0/2810.0.35.1 – 10.0.35.1410.0.35.15
1810.0.35.16/2810.0.35.17 – 10.0.35.3010.0.35.31
1910.0.35.32/2810.0.35.33 – 10.0.35.4610.0.35.47
2010.0.35.48/2810.0.35.49 – 10.0.35.6210.0.35.63
2110.0.35.64/2810.0.35.65 – 10.0.35.7810.0.35.79
2210.0.35.80/2810.0.35.81 – 10.0.35.9410.0.35.95
2310.0.35.96/2810.0.35.97 – 10.0.35.11010.0.35.111
2410.0.35.112/2810.0.35.113 – 10.0.35.12610.0.35.127
2510.0.35.128/2810.0.35.129 – 10.0.35.14210.0.35.143
2610.0.35.144/2810.0.35.145 – 10.0.35.15810.0.35.159
2710.0.35.160/2810.0.35.161 – 10.0.35.17410.0.35.175
2810.0.35.176/2810.0.35.177 – 10.0.35.19010.0.35.191
2910.0.35.192/2810.0.35.193 – 10.0.35.20610.0.35.207
3010.0.35.208/2810.0.35.209 – 10.0.35.22210.0.35.223
3110.0.35.224/2810.0.35.225 – 10.0.35.23810.0.35.239
3210.0.35.240/2810.0.35.241 – 10.0.35.25410.0.35.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →