ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.29.128/26
network10.0.29.128/26
broadcast10.0.29.191
first host10.0.29.129
last host10.0.29.190
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.0.29.128/26
address00001010.00000000.00011101.10000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000000.00011101.10000000
broadcast00001010.00000000.00011101.10111111
green = network part, grey = host part
hex0x0a001d80
decimal167779712
reverse dns128.29.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:1d80

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.29.128/3110.0.29.128 – 10.0.29.12910.0.29.129
210.0.29.130/3110.0.29.130 – 10.0.29.13110.0.29.131
310.0.29.132/3110.0.29.132 – 10.0.29.13310.0.29.133
410.0.29.134/3110.0.29.134 – 10.0.29.13510.0.29.135
510.0.29.136/3110.0.29.136 – 10.0.29.13710.0.29.137
610.0.29.138/3110.0.29.138 – 10.0.29.13910.0.29.139
710.0.29.140/3110.0.29.140 – 10.0.29.14110.0.29.141
810.0.29.142/3110.0.29.142 – 10.0.29.14310.0.29.143
910.0.29.144/3110.0.29.144 – 10.0.29.14510.0.29.145
1010.0.29.146/3110.0.29.146 – 10.0.29.14710.0.29.147
1110.0.29.148/3110.0.29.148 – 10.0.29.14910.0.29.149
1210.0.29.150/3110.0.29.150 – 10.0.29.15110.0.29.151
1310.0.29.152/3110.0.29.152 – 10.0.29.15310.0.29.153
1410.0.29.154/3110.0.29.154 – 10.0.29.15510.0.29.155
1510.0.29.156/3110.0.29.156 – 10.0.29.15710.0.29.157
1610.0.29.158/3110.0.29.158 – 10.0.29.15910.0.29.159
1710.0.29.160/3110.0.29.160 – 10.0.29.16110.0.29.161
1810.0.29.162/3110.0.29.162 – 10.0.29.16310.0.29.163
1910.0.29.164/3110.0.29.164 – 10.0.29.16510.0.29.165
2010.0.29.166/3110.0.29.166 – 10.0.29.16710.0.29.167
2110.0.29.168/3110.0.29.168 – 10.0.29.16910.0.29.169
2210.0.29.170/3110.0.29.170 – 10.0.29.17110.0.29.171
2310.0.29.172/3110.0.29.172 – 10.0.29.17310.0.29.173
2410.0.29.174/3110.0.29.174 – 10.0.29.17510.0.29.175
2510.0.29.176/3110.0.29.176 – 10.0.29.17710.0.29.177
2610.0.29.178/3110.0.29.178 – 10.0.29.17910.0.29.179
2710.0.29.180/3110.0.29.180 – 10.0.29.18110.0.29.181
2810.0.29.182/3110.0.29.182 – 10.0.29.18310.0.29.183
2910.0.29.184/3110.0.29.184 – 10.0.29.18510.0.29.185
3010.0.29.186/3110.0.29.186 – 10.0.29.18710.0.29.187
3110.0.29.188/3110.0.29.188 – 10.0.29.18910.0.29.189
3210.0.29.190/3110.0.29.190 – 10.0.29.19110.0.29.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →