ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.28.0/26
network10.0.28.0/26
broadcast10.0.28.63
first host10.0.28.1
last host10.0.28.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.0.28.0/26
address00001010.00000000.00011100.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000000.00011100.00000000
broadcast00001010.00000000.00011100.00111111
green = network part, grey = host part
hex0x0a001c00
decimal167779328
reverse dns0.28.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:1c00

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.0.28.0/3210.0.28.0 – 10.0.28.010.0.28.0
210.0.28.1/3210.0.28.1 – 10.0.28.110.0.28.1
310.0.28.2/3210.0.28.2 – 10.0.28.210.0.28.2
410.0.28.3/3210.0.28.3 – 10.0.28.310.0.28.3
510.0.28.4/3210.0.28.4 – 10.0.28.410.0.28.4
610.0.28.5/3210.0.28.5 – 10.0.28.510.0.28.5
710.0.28.6/3210.0.28.6 – 10.0.28.610.0.28.6
810.0.28.7/3210.0.28.7 – 10.0.28.710.0.28.7
910.0.28.8/3210.0.28.8 – 10.0.28.810.0.28.8
1010.0.28.9/3210.0.28.9 – 10.0.28.910.0.28.9
1110.0.28.10/3210.0.28.10 – 10.0.28.1010.0.28.10
1210.0.28.11/3210.0.28.11 – 10.0.28.1110.0.28.11
1310.0.28.12/3210.0.28.12 – 10.0.28.1210.0.28.12
1410.0.28.13/3210.0.28.13 – 10.0.28.1310.0.28.13
1510.0.28.14/3210.0.28.14 – 10.0.28.1410.0.28.14
1610.0.28.15/3210.0.28.15 – 10.0.28.1510.0.28.15
1710.0.28.16/3210.0.28.16 – 10.0.28.1610.0.28.16
1810.0.28.17/3210.0.28.17 – 10.0.28.1710.0.28.17
1910.0.28.18/3210.0.28.18 – 10.0.28.1810.0.28.18
2010.0.28.19/3210.0.28.19 – 10.0.28.1910.0.28.19
2110.0.28.20/3210.0.28.20 – 10.0.28.2010.0.28.20
2210.0.28.21/3210.0.28.21 – 10.0.28.2110.0.28.21
2310.0.28.22/3210.0.28.22 – 10.0.28.2210.0.28.22
2410.0.28.23/3210.0.28.23 – 10.0.28.2310.0.28.23
2510.0.28.24/3210.0.28.24 – 10.0.28.2410.0.28.24
2610.0.28.25/3210.0.28.25 – 10.0.28.2510.0.28.25
2710.0.28.26/3210.0.28.26 – 10.0.28.2610.0.28.26
2810.0.28.27/3210.0.28.27 – 10.0.28.2710.0.28.27
2910.0.28.28/3210.0.28.28 – 10.0.28.2810.0.28.28
3010.0.28.29/3210.0.28.29 – 10.0.28.2910.0.28.29
3110.0.28.30/3210.0.28.30 – 10.0.28.3010.0.28.30
3210.0.28.31/3210.0.28.31 – 10.0.28.3110.0.28.31
3310.0.28.32/3210.0.28.32 – 10.0.28.3210.0.28.32
3410.0.28.33/3210.0.28.33 – 10.0.28.3310.0.28.33
3510.0.28.34/3210.0.28.34 – 10.0.28.3410.0.28.34
3610.0.28.35/3210.0.28.35 – 10.0.28.3510.0.28.35
3710.0.28.36/3210.0.28.36 – 10.0.28.3610.0.28.36
3810.0.28.37/3210.0.28.37 – 10.0.28.3710.0.28.37
3910.0.28.38/3210.0.28.38 – 10.0.28.3810.0.28.38
4010.0.28.39/3210.0.28.39 – 10.0.28.3910.0.28.39
4110.0.28.40/3210.0.28.40 – 10.0.28.4010.0.28.40
4210.0.28.41/3210.0.28.41 – 10.0.28.4110.0.28.41
4310.0.28.42/3210.0.28.42 – 10.0.28.4210.0.28.42
4410.0.28.43/3210.0.28.43 – 10.0.28.4310.0.28.43
4510.0.28.44/3210.0.28.44 – 10.0.28.4410.0.28.44
4610.0.28.45/3210.0.28.45 – 10.0.28.4510.0.28.45
4710.0.28.46/3210.0.28.46 – 10.0.28.4610.0.28.46
4810.0.28.47/3210.0.28.47 – 10.0.28.4710.0.28.47
4910.0.28.48/3210.0.28.48 – 10.0.28.4810.0.28.48
5010.0.28.49/3210.0.28.49 – 10.0.28.4910.0.28.49
5110.0.28.50/3210.0.28.50 – 10.0.28.5010.0.28.50
5210.0.28.51/3210.0.28.51 – 10.0.28.5110.0.28.51
5310.0.28.52/3210.0.28.52 – 10.0.28.5210.0.28.52
5410.0.28.53/3210.0.28.53 – 10.0.28.5310.0.28.53
5510.0.28.54/3210.0.28.54 – 10.0.28.5410.0.28.54
5610.0.28.55/3210.0.28.55 – 10.0.28.5510.0.28.55
5710.0.28.56/3210.0.28.56 – 10.0.28.5610.0.28.56
5810.0.28.57/3210.0.28.57 – 10.0.28.5710.0.28.57
5910.0.28.58/3210.0.28.58 – 10.0.28.5810.0.28.58
6010.0.28.59/3210.0.28.59 – 10.0.28.5910.0.28.59
6110.0.28.60/3210.0.28.60 – 10.0.28.6010.0.28.60
6210.0.28.61/3210.0.28.61 – 10.0.28.6110.0.28.61
6310.0.28.62/3210.0.28.62 – 10.0.28.6210.0.28.62
6410.0.28.63/3210.0.28.63 – 10.0.28.6310.0.28.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →