ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.242.0/24
network10.0.242.0/24
broadcast10.0.242.255
first host10.0.242.1
last host10.0.242.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.0.242.0/24
address00001010.00000000.11110010.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000000.11110010.00000000
broadcast00001010.00000000.11110010.11111111
green = network part, grey = host part
hex0x0a00f200
decimal167834112
reverse dns0.242.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:f200

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.0.242.0/3010.0.242.1 – 10.0.242.210.0.242.3
210.0.242.4/3010.0.242.5 – 10.0.242.610.0.242.7
310.0.242.8/3010.0.242.9 – 10.0.242.1010.0.242.11
410.0.242.12/3010.0.242.13 – 10.0.242.1410.0.242.15
510.0.242.16/3010.0.242.17 – 10.0.242.1810.0.242.19
610.0.242.20/3010.0.242.21 – 10.0.242.2210.0.242.23
710.0.242.24/3010.0.242.25 – 10.0.242.2610.0.242.27
810.0.242.28/3010.0.242.29 – 10.0.242.3010.0.242.31
910.0.242.32/3010.0.242.33 – 10.0.242.3410.0.242.35
1010.0.242.36/3010.0.242.37 – 10.0.242.3810.0.242.39
1110.0.242.40/3010.0.242.41 – 10.0.242.4210.0.242.43
1210.0.242.44/3010.0.242.45 – 10.0.242.4610.0.242.47
1310.0.242.48/3010.0.242.49 – 10.0.242.5010.0.242.51
1410.0.242.52/3010.0.242.53 – 10.0.242.5410.0.242.55
1510.0.242.56/3010.0.242.57 – 10.0.242.5810.0.242.59
1610.0.242.60/3010.0.242.61 – 10.0.242.6210.0.242.63
1710.0.242.64/3010.0.242.65 – 10.0.242.6610.0.242.67
1810.0.242.68/3010.0.242.69 – 10.0.242.7010.0.242.71
1910.0.242.72/3010.0.242.73 – 10.0.242.7410.0.242.75
2010.0.242.76/3010.0.242.77 – 10.0.242.7810.0.242.79
2110.0.242.80/3010.0.242.81 – 10.0.242.8210.0.242.83
2210.0.242.84/3010.0.242.85 – 10.0.242.8610.0.242.87
2310.0.242.88/3010.0.242.89 – 10.0.242.9010.0.242.91
2410.0.242.92/3010.0.242.93 – 10.0.242.9410.0.242.95
2510.0.242.96/3010.0.242.97 – 10.0.242.9810.0.242.99
2610.0.242.100/3010.0.242.101 – 10.0.242.10210.0.242.103
2710.0.242.104/3010.0.242.105 – 10.0.242.10610.0.242.107
2810.0.242.108/3010.0.242.109 – 10.0.242.11010.0.242.111
2910.0.242.112/3010.0.242.113 – 10.0.242.11410.0.242.115
3010.0.242.116/3010.0.242.117 – 10.0.242.11810.0.242.119
3110.0.242.120/3010.0.242.121 – 10.0.242.12210.0.242.123
3210.0.242.124/3010.0.242.125 – 10.0.242.12610.0.242.127
3310.0.242.128/3010.0.242.129 – 10.0.242.13010.0.242.131
3410.0.242.132/3010.0.242.133 – 10.0.242.13410.0.242.135
3510.0.242.136/3010.0.242.137 – 10.0.242.13810.0.242.139
3610.0.242.140/3010.0.242.141 – 10.0.242.14210.0.242.143
3710.0.242.144/3010.0.242.145 – 10.0.242.14610.0.242.147
3810.0.242.148/3010.0.242.149 – 10.0.242.15010.0.242.151
3910.0.242.152/3010.0.242.153 – 10.0.242.15410.0.242.155
4010.0.242.156/3010.0.242.157 – 10.0.242.15810.0.242.159
4110.0.242.160/3010.0.242.161 – 10.0.242.16210.0.242.163
4210.0.242.164/3010.0.242.165 – 10.0.242.16610.0.242.167
4310.0.242.168/3010.0.242.169 – 10.0.242.17010.0.242.171
4410.0.242.172/3010.0.242.173 – 10.0.242.17410.0.242.175
4510.0.242.176/3010.0.242.177 – 10.0.242.17810.0.242.179
4610.0.242.180/3010.0.242.181 – 10.0.242.18210.0.242.183
4710.0.242.184/3010.0.242.185 – 10.0.242.18610.0.242.187
4810.0.242.188/3010.0.242.189 – 10.0.242.19010.0.242.191
4910.0.242.192/3010.0.242.193 – 10.0.242.19410.0.242.195
5010.0.242.196/3010.0.242.197 – 10.0.242.19810.0.242.199
5110.0.242.200/3010.0.242.201 – 10.0.242.20210.0.242.203
5210.0.242.204/3010.0.242.205 – 10.0.242.20610.0.242.207
5310.0.242.208/3010.0.242.209 – 10.0.242.21010.0.242.211
5410.0.242.212/3010.0.242.213 – 10.0.242.21410.0.242.215
5510.0.242.216/3010.0.242.217 – 10.0.242.21810.0.242.219
5610.0.242.220/3010.0.242.221 – 10.0.242.22210.0.242.223
5710.0.242.224/3010.0.242.225 – 10.0.242.22610.0.242.227
5810.0.242.228/3010.0.242.229 – 10.0.242.23010.0.242.231
5910.0.242.232/3010.0.242.233 – 10.0.242.23410.0.242.235
6010.0.242.236/3010.0.242.237 – 10.0.242.23810.0.242.239
6110.0.242.240/3010.0.242.241 – 10.0.242.24210.0.242.243
6210.0.242.244/3010.0.242.245 – 10.0.242.24610.0.242.247
6310.0.242.248/3010.0.242.249 – 10.0.242.25010.0.242.251
6410.0.242.252/3010.0.242.253 – 10.0.242.25410.0.242.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →