IPv4 Subnet Calculator
Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.
private IP (RFC 1918)10.0.214.0/24
network10.0.214.0/24
broadcast10.0.214.255
first host10.0.214.1
last host10.0.214.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.0.214.0/24
address00001010.00000000.11010110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000000.11010110.00000000
broadcast00001010.00000000.11010110.11111111
green = network part, grey = host part
hex0x0a00d600
decimal167826944
reverse dns0.214.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:d600
/24 split into /29 · 32 subnets
close ×| # | network | host range | broadcast |
|---|---|---|---|
| 1 | 10.0.214.0/29 | 10.0.214.1 – 10.0.214.6 | 10.0.214.7 |
| 2 | 10.0.214.8/29 | 10.0.214.9 – 10.0.214.14 | 10.0.214.15 |
| 3 | 10.0.214.16/29 | 10.0.214.17 – 10.0.214.22 | 10.0.214.23 |
| 4 | 10.0.214.24/29 | 10.0.214.25 – 10.0.214.30 | 10.0.214.31 |
| 5 | 10.0.214.32/29 | 10.0.214.33 – 10.0.214.38 | 10.0.214.39 |
| 6 | 10.0.214.40/29 | 10.0.214.41 – 10.0.214.46 | 10.0.214.47 |
| 7 | 10.0.214.48/29 | 10.0.214.49 – 10.0.214.54 | 10.0.214.55 |
| 8 | 10.0.214.56/29 | 10.0.214.57 – 10.0.214.62 | 10.0.214.63 |
| 9 | 10.0.214.64/29 | 10.0.214.65 – 10.0.214.70 | 10.0.214.71 |
| 10 | 10.0.214.72/29 | 10.0.214.73 – 10.0.214.78 | 10.0.214.79 |
| 11 | 10.0.214.80/29 | 10.0.214.81 – 10.0.214.86 | 10.0.214.87 |
| 12 | 10.0.214.88/29 | 10.0.214.89 – 10.0.214.94 | 10.0.214.95 |
| 13 | 10.0.214.96/29 | 10.0.214.97 – 10.0.214.102 | 10.0.214.103 |
| 14 | 10.0.214.104/29 | 10.0.214.105 – 10.0.214.110 | 10.0.214.111 |
| 15 | 10.0.214.112/29 | 10.0.214.113 – 10.0.214.118 | 10.0.214.119 |
| 16 | 10.0.214.120/29 | 10.0.214.121 – 10.0.214.126 | 10.0.214.127 |
| 17 | 10.0.214.128/29 | 10.0.214.129 – 10.0.214.134 | 10.0.214.135 |
| 18 | 10.0.214.136/29 | 10.0.214.137 – 10.0.214.142 | 10.0.214.143 |
| 19 | 10.0.214.144/29 | 10.0.214.145 – 10.0.214.150 | 10.0.214.151 |
| 20 | 10.0.214.152/29 | 10.0.214.153 – 10.0.214.158 | 10.0.214.159 |
| 21 | 10.0.214.160/29 | 10.0.214.161 – 10.0.214.166 | 10.0.214.167 |
| 22 | 10.0.214.168/29 | 10.0.214.169 – 10.0.214.174 | 10.0.214.175 |
| 23 | 10.0.214.176/29 | 10.0.214.177 – 10.0.214.182 | 10.0.214.183 |
| 24 | 10.0.214.184/29 | 10.0.214.185 – 10.0.214.190 | 10.0.214.191 |
| 25 | 10.0.214.192/29 | 10.0.214.193 – 10.0.214.198 | 10.0.214.199 |
| 26 | 10.0.214.200/29 | 10.0.214.201 – 10.0.214.206 | 10.0.214.207 |
| 27 | 10.0.214.208/29 | 10.0.214.209 – 10.0.214.214 | 10.0.214.215 |
| 28 | 10.0.214.216/29 | 10.0.214.217 – 10.0.214.222 | 10.0.214.223 |
| 29 | 10.0.214.224/29 | 10.0.214.225 – 10.0.214.230 | 10.0.214.231 |
| 30 | 10.0.214.232/29 | 10.0.214.233 – 10.0.214.238 | 10.0.214.239 |
| 31 | 10.0.214.240/29 | 10.0.214.241 – 10.0.214.246 | 10.0.214.247 |
| 32 | 10.0.214.248/29 | 10.0.214.249 – 10.0.214.254 | 10.0.214.255 |
01 / table
IPv4 CIDR prefix table.
Click a prefix longer than your network to split it into subnets.
| prefix | subnet mask | addresses | hosts | in your /24 |
|---|---|---|---|---|
| /0 | 0.0.0.0 | 4,294,967,296 | 4,294,967,294 | - |
| /1 | 128.0.0.0 | 2,147,483,648 | 2,147,483,646 | - |
| /2 | 192.0.0.0 | 1,073,741,824 | 1,073,741,822 | - |
| /3 | 224.0.0.0 | 536,870,912 | 536,870,910 | - |
| /4 | 240.0.0.0 | 268,435,456 | 268,435,454 | - |
| /5 | 248.0.0.0 | 134,217,728 | 134,217,726 | - |
| /6 | 252.0.0.0 | 67,108,864 | 67,108,862 | - |
| /7 | 254.0.0.0 | 33,554,432 | 33,554,430 | - |
| /8 | 255.0.0.0 | 16,777,216 | 16,777,214 | - |
| /9 | 255.128.0.0 | 8,388,608 | 8,388,606 | - |
| /10 | 255.192.0.0 | 4,194,304 | 4,194,302 | - |
| /11 | 255.224.0.0 | 2,097,152 | 2,097,150 | - |
| /12 | 255.240.0.0 | 1,048,576 | 1,048,574 | - |
| /13 | 255.248.0.0 | 524,288 | 524,286 | - |
| /14 | 255.252.0.0 | 262,144 | 262,142 | - |
| /15 | 255.254.0.0 | 131,072 | 131,070 | - |
| /16 | 255.255.0.0 | 65,536 | 65,534 | - |
| /17 | 255.255.128.0 | 32,768 | 32,766 | - |
| /18 | 255.255.192.0 | 16,384 | 16,382 | - |
| /19 | 255.255.224.0 | 8,192 | 8,190 | - |
| /20 | 255.255.240.0 | 4,096 | 4,094 | - |
| /21 | 255.255.248.0 | 2,048 | 2,046 | - |
| /22 | 255.255.252.0 | 1,024 | 1,022 | - |
| /23 | 255.255.254.0 | 512 | 510 | - |
| /24 | 255.255.255.0 | 256 | 254 | 1 |
| /25 | 255.255.255.128 | 128 | 126 | 2 split → |
| /26 | 255.255.255.192 | 64 | 62 | 4 split → |
| /27 | 255.255.255.224 | 32 | 30 | 8 split → |
| /28 | 255.255.255.240 | 16 | 14 | 16 split → |
| /29 | 255.255.255.248 | 8 | 6 | 32 split → |
| /30 | 255.255.255.252 | 4 | 2 | 64 split → |
| /31 | 255.255.255.254 | 2 | 2 | 128 split → |
| /32 | 255.255.255.255 | 1 | 1 | 256 split → |
02 / faq
About this calculator.
How do I use this subnet calculator?
▼
Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.
Why are usable hosts always 2 fewer?
▼
The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.
Can I use it from a terminal?
▼
Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.