ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.191.0/24
network10.0.191.0/24
broadcast10.0.191.255
first host10.0.191.1
last host10.0.191.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.0.191.0/24
address00001010.00000000.10111111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000000.10111111.00000000
broadcast00001010.00000000.10111111.11111111
green = network part, grey = host part
hex0x0a00bf00
decimal167821056
reverse dns0.191.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:bf00

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.191.0/2910.0.191.1 – 10.0.191.610.0.191.7
210.0.191.8/2910.0.191.9 – 10.0.191.1410.0.191.15
310.0.191.16/2910.0.191.17 – 10.0.191.2210.0.191.23
410.0.191.24/2910.0.191.25 – 10.0.191.3010.0.191.31
510.0.191.32/2910.0.191.33 – 10.0.191.3810.0.191.39
610.0.191.40/2910.0.191.41 – 10.0.191.4610.0.191.47
710.0.191.48/2910.0.191.49 – 10.0.191.5410.0.191.55
810.0.191.56/2910.0.191.57 – 10.0.191.6210.0.191.63
910.0.191.64/2910.0.191.65 – 10.0.191.7010.0.191.71
1010.0.191.72/2910.0.191.73 – 10.0.191.7810.0.191.79
1110.0.191.80/2910.0.191.81 – 10.0.191.8610.0.191.87
1210.0.191.88/2910.0.191.89 – 10.0.191.9410.0.191.95
1310.0.191.96/2910.0.191.97 – 10.0.191.10210.0.191.103
1410.0.191.104/2910.0.191.105 – 10.0.191.11010.0.191.111
1510.0.191.112/2910.0.191.113 – 10.0.191.11810.0.191.119
1610.0.191.120/2910.0.191.121 – 10.0.191.12610.0.191.127
1710.0.191.128/2910.0.191.129 – 10.0.191.13410.0.191.135
1810.0.191.136/2910.0.191.137 – 10.0.191.14210.0.191.143
1910.0.191.144/2910.0.191.145 – 10.0.191.15010.0.191.151
2010.0.191.152/2910.0.191.153 – 10.0.191.15810.0.191.159
2110.0.191.160/2910.0.191.161 – 10.0.191.16610.0.191.167
2210.0.191.168/2910.0.191.169 – 10.0.191.17410.0.191.175
2310.0.191.176/2910.0.191.177 – 10.0.191.18210.0.191.183
2410.0.191.184/2910.0.191.185 – 10.0.191.19010.0.191.191
2510.0.191.192/2910.0.191.193 – 10.0.191.19810.0.191.199
2610.0.191.200/2910.0.191.201 – 10.0.191.20610.0.191.207
2710.0.191.208/2910.0.191.209 – 10.0.191.21410.0.191.215
2810.0.191.216/2910.0.191.217 – 10.0.191.22210.0.191.223
2910.0.191.224/2910.0.191.225 – 10.0.191.23010.0.191.231
3010.0.191.232/2910.0.191.233 – 10.0.191.23810.0.191.239
3110.0.191.240/2910.0.191.241 – 10.0.191.24610.0.191.247
3210.0.191.248/2910.0.191.249 – 10.0.191.25410.0.191.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →