ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.166.0/24
network10.0.166.0/24
broadcast10.0.166.255
first host10.0.166.1
last host10.0.166.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.0.166.0/24
address00001010.00000000.10100110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000000.10100110.00000000
broadcast00001010.00000000.10100110.11111111
green = network part, grey = host part
hex0x0a00a600
decimal167814656
reverse dns0.166.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:a600

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.0.166.0/3010.0.166.1 – 10.0.166.210.0.166.3
210.0.166.4/3010.0.166.5 – 10.0.166.610.0.166.7
310.0.166.8/3010.0.166.9 – 10.0.166.1010.0.166.11
410.0.166.12/3010.0.166.13 – 10.0.166.1410.0.166.15
510.0.166.16/3010.0.166.17 – 10.0.166.1810.0.166.19
610.0.166.20/3010.0.166.21 – 10.0.166.2210.0.166.23
710.0.166.24/3010.0.166.25 – 10.0.166.2610.0.166.27
810.0.166.28/3010.0.166.29 – 10.0.166.3010.0.166.31
910.0.166.32/3010.0.166.33 – 10.0.166.3410.0.166.35
1010.0.166.36/3010.0.166.37 – 10.0.166.3810.0.166.39
1110.0.166.40/3010.0.166.41 – 10.0.166.4210.0.166.43
1210.0.166.44/3010.0.166.45 – 10.0.166.4610.0.166.47
1310.0.166.48/3010.0.166.49 – 10.0.166.5010.0.166.51
1410.0.166.52/3010.0.166.53 – 10.0.166.5410.0.166.55
1510.0.166.56/3010.0.166.57 – 10.0.166.5810.0.166.59
1610.0.166.60/3010.0.166.61 – 10.0.166.6210.0.166.63
1710.0.166.64/3010.0.166.65 – 10.0.166.6610.0.166.67
1810.0.166.68/3010.0.166.69 – 10.0.166.7010.0.166.71
1910.0.166.72/3010.0.166.73 – 10.0.166.7410.0.166.75
2010.0.166.76/3010.0.166.77 – 10.0.166.7810.0.166.79
2110.0.166.80/3010.0.166.81 – 10.0.166.8210.0.166.83
2210.0.166.84/3010.0.166.85 – 10.0.166.8610.0.166.87
2310.0.166.88/3010.0.166.89 – 10.0.166.9010.0.166.91
2410.0.166.92/3010.0.166.93 – 10.0.166.9410.0.166.95
2510.0.166.96/3010.0.166.97 – 10.0.166.9810.0.166.99
2610.0.166.100/3010.0.166.101 – 10.0.166.10210.0.166.103
2710.0.166.104/3010.0.166.105 – 10.0.166.10610.0.166.107
2810.0.166.108/3010.0.166.109 – 10.0.166.11010.0.166.111
2910.0.166.112/3010.0.166.113 – 10.0.166.11410.0.166.115
3010.0.166.116/3010.0.166.117 – 10.0.166.11810.0.166.119
3110.0.166.120/3010.0.166.121 – 10.0.166.12210.0.166.123
3210.0.166.124/3010.0.166.125 – 10.0.166.12610.0.166.127
3310.0.166.128/3010.0.166.129 – 10.0.166.13010.0.166.131
3410.0.166.132/3010.0.166.133 – 10.0.166.13410.0.166.135
3510.0.166.136/3010.0.166.137 – 10.0.166.13810.0.166.139
3610.0.166.140/3010.0.166.141 – 10.0.166.14210.0.166.143
3710.0.166.144/3010.0.166.145 – 10.0.166.14610.0.166.147
3810.0.166.148/3010.0.166.149 – 10.0.166.15010.0.166.151
3910.0.166.152/3010.0.166.153 – 10.0.166.15410.0.166.155
4010.0.166.156/3010.0.166.157 – 10.0.166.15810.0.166.159
4110.0.166.160/3010.0.166.161 – 10.0.166.16210.0.166.163
4210.0.166.164/3010.0.166.165 – 10.0.166.16610.0.166.167
4310.0.166.168/3010.0.166.169 – 10.0.166.17010.0.166.171
4410.0.166.172/3010.0.166.173 – 10.0.166.17410.0.166.175
4510.0.166.176/3010.0.166.177 – 10.0.166.17810.0.166.179
4610.0.166.180/3010.0.166.181 – 10.0.166.18210.0.166.183
4710.0.166.184/3010.0.166.185 – 10.0.166.18610.0.166.187
4810.0.166.188/3010.0.166.189 – 10.0.166.19010.0.166.191
4910.0.166.192/3010.0.166.193 – 10.0.166.19410.0.166.195
5010.0.166.196/3010.0.166.197 – 10.0.166.19810.0.166.199
5110.0.166.200/3010.0.166.201 – 10.0.166.20210.0.166.203
5210.0.166.204/3010.0.166.205 – 10.0.166.20610.0.166.207
5310.0.166.208/3010.0.166.209 – 10.0.166.21010.0.166.211
5410.0.166.212/3010.0.166.213 – 10.0.166.21410.0.166.215
5510.0.166.216/3010.0.166.217 – 10.0.166.21810.0.166.219
5610.0.166.220/3010.0.166.221 – 10.0.166.22210.0.166.223
5710.0.166.224/3010.0.166.225 – 10.0.166.22610.0.166.227
5810.0.166.228/3010.0.166.229 – 10.0.166.23010.0.166.231
5910.0.166.232/3010.0.166.233 – 10.0.166.23410.0.166.235
6010.0.166.236/3010.0.166.237 – 10.0.166.23810.0.166.239
6110.0.166.240/3010.0.166.241 – 10.0.166.24210.0.166.243
6210.0.166.244/3010.0.166.245 – 10.0.166.24610.0.166.247
6310.0.166.248/3010.0.166.249 – 10.0.166.25010.0.166.251
6410.0.166.252/3010.0.166.253 – 10.0.166.25410.0.166.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →