ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.142.0/24
network10.0.142.0/24
broadcast10.0.142.255
first host10.0.142.1
last host10.0.142.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.0.142.0/24
address00001010.00000000.10001110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000000.10001110.00000000
broadcast00001010.00000000.10001110.11111111
green = network part, grey = host part
hex0x0a008e00
decimal167808512
reverse dns0.142.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:8e00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.0.142.0/3010.0.142.1 – 10.0.142.210.0.142.3
210.0.142.4/3010.0.142.5 – 10.0.142.610.0.142.7
310.0.142.8/3010.0.142.9 – 10.0.142.1010.0.142.11
410.0.142.12/3010.0.142.13 – 10.0.142.1410.0.142.15
510.0.142.16/3010.0.142.17 – 10.0.142.1810.0.142.19
610.0.142.20/3010.0.142.21 – 10.0.142.2210.0.142.23
710.0.142.24/3010.0.142.25 – 10.0.142.2610.0.142.27
810.0.142.28/3010.0.142.29 – 10.0.142.3010.0.142.31
910.0.142.32/3010.0.142.33 – 10.0.142.3410.0.142.35
1010.0.142.36/3010.0.142.37 – 10.0.142.3810.0.142.39
1110.0.142.40/3010.0.142.41 – 10.0.142.4210.0.142.43
1210.0.142.44/3010.0.142.45 – 10.0.142.4610.0.142.47
1310.0.142.48/3010.0.142.49 – 10.0.142.5010.0.142.51
1410.0.142.52/3010.0.142.53 – 10.0.142.5410.0.142.55
1510.0.142.56/3010.0.142.57 – 10.0.142.5810.0.142.59
1610.0.142.60/3010.0.142.61 – 10.0.142.6210.0.142.63
1710.0.142.64/3010.0.142.65 – 10.0.142.6610.0.142.67
1810.0.142.68/3010.0.142.69 – 10.0.142.7010.0.142.71
1910.0.142.72/3010.0.142.73 – 10.0.142.7410.0.142.75
2010.0.142.76/3010.0.142.77 – 10.0.142.7810.0.142.79
2110.0.142.80/3010.0.142.81 – 10.0.142.8210.0.142.83
2210.0.142.84/3010.0.142.85 – 10.0.142.8610.0.142.87
2310.0.142.88/3010.0.142.89 – 10.0.142.9010.0.142.91
2410.0.142.92/3010.0.142.93 – 10.0.142.9410.0.142.95
2510.0.142.96/3010.0.142.97 – 10.0.142.9810.0.142.99
2610.0.142.100/3010.0.142.101 – 10.0.142.10210.0.142.103
2710.0.142.104/3010.0.142.105 – 10.0.142.10610.0.142.107
2810.0.142.108/3010.0.142.109 – 10.0.142.11010.0.142.111
2910.0.142.112/3010.0.142.113 – 10.0.142.11410.0.142.115
3010.0.142.116/3010.0.142.117 – 10.0.142.11810.0.142.119
3110.0.142.120/3010.0.142.121 – 10.0.142.12210.0.142.123
3210.0.142.124/3010.0.142.125 – 10.0.142.12610.0.142.127
3310.0.142.128/3010.0.142.129 – 10.0.142.13010.0.142.131
3410.0.142.132/3010.0.142.133 – 10.0.142.13410.0.142.135
3510.0.142.136/3010.0.142.137 – 10.0.142.13810.0.142.139
3610.0.142.140/3010.0.142.141 – 10.0.142.14210.0.142.143
3710.0.142.144/3010.0.142.145 – 10.0.142.14610.0.142.147
3810.0.142.148/3010.0.142.149 – 10.0.142.15010.0.142.151
3910.0.142.152/3010.0.142.153 – 10.0.142.15410.0.142.155
4010.0.142.156/3010.0.142.157 – 10.0.142.15810.0.142.159
4110.0.142.160/3010.0.142.161 – 10.0.142.16210.0.142.163
4210.0.142.164/3010.0.142.165 – 10.0.142.16610.0.142.167
4310.0.142.168/3010.0.142.169 – 10.0.142.17010.0.142.171
4410.0.142.172/3010.0.142.173 – 10.0.142.17410.0.142.175
4510.0.142.176/3010.0.142.177 – 10.0.142.17810.0.142.179
4610.0.142.180/3010.0.142.181 – 10.0.142.18210.0.142.183
4710.0.142.184/3010.0.142.185 – 10.0.142.18610.0.142.187
4810.0.142.188/3010.0.142.189 – 10.0.142.19010.0.142.191
4910.0.142.192/3010.0.142.193 – 10.0.142.19410.0.142.195
5010.0.142.196/3010.0.142.197 – 10.0.142.19810.0.142.199
5110.0.142.200/3010.0.142.201 – 10.0.142.20210.0.142.203
5210.0.142.204/3010.0.142.205 – 10.0.142.20610.0.142.207
5310.0.142.208/3010.0.142.209 – 10.0.142.21010.0.142.211
5410.0.142.212/3010.0.142.213 – 10.0.142.21410.0.142.215
5510.0.142.216/3010.0.142.217 – 10.0.142.21810.0.142.219
5610.0.142.220/3010.0.142.221 – 10.0.142.22210.0.142.223
5710.0.142.224/3010.0.142.225 – 10.0.142.22610.0.142.227
5810.0.142.228/3010.0.142.229 – 10.0.142.23010.0.142.231
5910.0.142.232/3010.0.142.233 – 10.0.142.23410.0.142.235
6010.0.142.236/3010.0.142.237 – 10.0.142.23810.0.142.239
6110.0.142.240/3010.0.142.241 – 10.0.142.24210.0.142.243
6210.0.142.244/3010.0.142.245 – 10.0.142.24610.0.142.247
6310.0.142.248/3010.0.142.249 – 10.0.142.25010.0.142.251
6410.0.142.252/3010.0.142.253 – 10.0.142.25410.0.142.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →