ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.126.0/23
network10.0.126.0/23
broadcast10.0.127.255
first host10.0.126.1
last host10.0.127.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.0.126.0/23
address00001010.00000000.01111110.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00000000.01111110.00000000
broadcast00001010.00000000.01111111.11111111
green = network part, grey = host part
hex0x0a007e00
decimal167804416
reverse dns0.126.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:7e00

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.126.0/2810.0.126.1 – 10.0.126.1410.0.126.15
210.0.126.16/2810.0.126.17 – 10.0.126.3010.0.126.31
310.0.126.32/2810.0.126.33 – 10.0.126.4610.0.126.47
410.0.126.48/2810.0.126.49 – 10.0.126.6210.0.126.63
510.0.126.64/2810.0.126.65 – 10.0.126.7810.0.126.79
610.0.126.80/2810.0.126.81 – 10.0.126.9410.0.126.95
710.0.126.96/2810.0.126.97 – 10.0.126.11010.0.126.111
810.0.126.112/2810.0.126.113 – 10.0.126.12610.0.126.127
910.0.126.128/2810.0.126.129 – 10.0.126.14210.0.126.143
1010.0.126.144/2810.0.126.145 – 10.0.126.15810.0.126.159
1110.0.126.160/2810.0.126.161 – 10.0.126.17410.0.126.175
1210.0.126.176/2810.0.126.177 – 10.0.126.19010.0.126.191
1310.0.126.192/2810.0.126.193 – 10.0.126.20610.0.126.207
1410.0.126.208/2810.0.126.209 – 10.0.126.22210.0.126.223
1510.0.126.224/2810.0.126.225 – 10.0.126.23810.0.126.239
1610.0.126.240/2810.0.126.241 – 10.0.126.25410.0.126.255
1710.0.127.0/2810.0.127.1 – 10.0.127.1410.0.127.15
1810.0.127.16/2810.0.127.17 – 10.0.127.3010.0.127.31
1910.0.127.32/2810.0.127.33 – 10.0.127.4610.0.127.47
2010.0.127.48/2810.0.127.49 – 10.0.127.6210.0.127.63
2110.0.127.64/2810.0.127.65 – 10.0.127.7810.0.127.79
2210.0.127.80/2810.0.127.81 – 10.0.127.9410.0.127.95
2310.0.127.96/2810.0.127.97 – 10.0.127.11010.0.127.111
2410.0.127.112/2810.0.127.113 – 10.0.127.12610.0.127.127
2510.0.127.128/2810.0.127.129 – 10.0.127.14210.0.127.143
2610.0.127.144/2810.0.127.145 – 10.0.127.15810.0.127.159
2710.0.127.160/2810.0.127.161 – 10.0.127.17410.0.127.175
2810.0.127.176/2810.0.127.177 – 10.0.127.19010.0.127.191
2910.0.127.192/2810.0.127.193 – 10.0.127.20610.0.127.207
3010.0.127.208/2810.0.127.209 – 10.0.127.22210.0.127.223
3110.0.127.224/2810.0.127.225 – 10.0.127.23810.0.127.239
3210.0.127.240/2810.0.127.241 – 10.0.127.25410.0.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →