ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.116.0/23
network10.0.116.0/23
broadcast10.0.117.255
first host10.0.116.1
last host10.0.117.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.0.116.0/23
address00001010.00000000.01110100.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00000000.01110100.00000000
broadcast00001010.00000000.01110101.11111111
green = network part, grey = host part
hex0x0a007400
decimal167801856
reverse dns0.116.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:7400

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.0.116.0/2810.0.116.1 – 10.0.116.1410.0.116.15
210.0.116.16/2810.0.116.17 – 10.0.116.3010.0.116.31
310.0.116.32/2810.0.116.33 – 10.0.116.4610.0.116.47
410.0.116.48/2810.0.116.49 – 10.0.116.6210.0.116.63
510.0.116.64/2810.0.116.65 – 10.0.116.7810.0.116.79
610.0.116.80/2810.0.116.81 – 10.0.116.9410.0.116.95
710.0.116.96/2810.0.116.97 – 10.0.116.11010.0.116.111
810.0.116.112/2810.0.116.113 – 10.0.116.12610.0.116.127
910.0.116.128/2810.0.116.129 – 10.0.116.14210.0.116.143
1010.0.116.144/2810.0.116.145 – 10.0.116.15810.0.116.159
1110.0.116.160/2810.0.116.161 – 10.0.116.17410.0.116.175
1210.0.116.176/2810.0.116.177 – 10.0.116.19010.0.116.191
1310.0.116.192/2810.0.116.193 – 10.0.116.20610.0.116.207
1410.0.116.208/2810.0.116.209 – 10.0.116.22210.0.116.223
1510.0.116.224/2810.0.116.225 – 10.0.116.23810.0.116.239
1610.0.116.240/2810.0.116.241 – 10.0.116.25410.0.116.255
1710.0.117.0/2810.0.117.1 – 10.0.117.1410.0.117.15
1810.0.117.16/2810.0.117.17 – 10.0.117.3010.0.117.31
1910.0.117.32/2810.0.117.33 – 10.0.117.4610.0.117.47
2010.0.117.48/2810.0.117.49 – 10.0.117.6210.0.117.63
2110.0.117.64/2810.0.117.65 – 10.0.117.7810.0.117.79
2210.0.117.80/2810.0.117.81 – 10.0.117.9410.0.117.95
2310.0.117.96/2810.0.117.97 – 10.0.117.11010.0.117.111
2410.0.117.112/2810.0.117.113 – 10.0.117.12610.0.117.127
2510.0.117.128/2810.0.117.129 – 10.0.117.14210.0.117.143
2610.0.117.144/2810.0.117.145 – 10.0.117.15810.0.117.159
2710.0.117.160/2810.0.117.161 – 10.0.117.17410.0.117.175
2810.0.117.176/2810.0.117.177 – 10.0.117.19010.0.117.191
2910.0.117.192/2810.0.117.193 – 10.0.117.20610.0.117.207
3010.0.117.208/2810.0.117.209 – 10.0.117.22210.0.117.223
3110.0.117.224/2810.0.117.225 – 10.0.117.23810.0.117.239
3210.0.117.240/2810.0.117.241 – 10.0.117.25410.0.117.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →