ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.0.0.0/8
network10.0.0.0/8
broadcast10.255.255.255
first host10.0.0.1
last host10.255.255.254
subnet mask255.0.0.0
wildcard0.255.255.255
addresses16,777,216
usable hosts16,777,214
classA
ipcalc 10.0.0.0/8
address00001010.00000000.00000000.00000000
subnet mask11111111.00000000.00000000.00000000
network00001010.00000000.00000000.00000000
broadcast00001010.11111111.11111111.11111111
green = network part, grey = host part
hex0x0a000000
decimal167772160
reverse dns0.0.0.10.in-addr.arpa
ipv4-mapped::ffff:a00:0

/8 split into /14 · 64 subnets

close ×
#networkhost rangebroadcast
110.0.0.0/1410.0.0.1 – 10.3.255.25410.3.255.255
210.4.0.0/1410.4.0.1 – 10.7.255.25410.7.255.255
310.8.0.0/1410.8.0.1 – 10.11.255.25410.11.255.255
410.12.0.0/1410.12.0.1 – 10.15.255.25410.15.255.255
510.16.0.0/1410.16.0.1 – 10.19.255.25410.19.255.255
610.20.0.0/1410.20.0.1 – 10.23.255.25410.23.255.255
710.24.0.0/1410.24.0.1 – 10.27.255.25410.27.255.255
810.28.0.0/1410.28.0.1 – 10.31.255.25410.31.255.255
910.32.0.0/1410.32.0.1 – 10.35.255.25410.35.255.255
1010.36.0.0/1410.36.0.1 – 10.39.255.25410.39.255.255
1110.40.0.0/1410.40.0.1 – 10.43.255.25410.43.255.255
1210.44.0.0/1410.44.0.1 – 10.47.255.25410.47.255.255
1310.48.0.0/1410.48.0.1 – 10.51.255.25410.51.255.255
1410.52.0.0/1410.52.0.1 – 10.55.255.25410.55.255.255
1510.56.0.0/1410.56.0.1 – 10.59.255.25410.59.255.255
1610.60.0.0/1410.60.0.1 – 10.63.255.25410.63.255.255
1710.64.0.0/1410.64.0.1 – 10.67.255.25410.67.255.255
1810.68.0.0/1410.68.0.1 – 10.71.255.25410.71.255.255
1910.72.0.0/1410.72.0.1 – 10.75.255.25410.75.255.255
2010.76.0.0/1410.76.0.1 – 10.79.255.25410.79.255.255
2110.80.0.0/1410.80.0.1 – 10.83.255.25410.83.255.255
2210.84.0.0/1410.84.0.1 – 10.87.255.25410.87.255.255
2310.88.0.0/1410.88.0.1 – 10.91.255.25410.91.255.255
2410.92.0.0/1410.92.0.1 – 10.95.255.25410.95.255.255
2510.96.0.0/1410.96.0.1 – 10.99.255.25410.99.255.255
2610.100.0.0/1410.100.0.1 – 10.103.255.25410.103.255.255
2710.104.0.0/1410.104.0.1 – 10.107.255.25410.107.255.255
2810.108.0.0/1410.108.0.1 – 10.111.255.25410.111.255.255
2910.112.0.0/1410.112.0.1 – 10.115.255.25410.115.255.255
3010.116.0.0/1410.116.0.1 – 10.119.255.25410.119.255.255
3110.120.0.0/1410.120.0.1 – 10.123.255.25410.123.255.255
3210.124.0.0/1410.124.0.1 – 10.127.255.25410.127.255.255
3310.128.0.0/1410.128.0.1 – 10.131.255.25410.131.255.255
3410.132.0.0/1410.132.0.1 – 10.135.255.25410.135.255.255
3510.136.0.0/1410.136.0.1 – 10.139.255.25410.139.255.255
3610.140.0.0/1410.140.0.1 – 10.143.255.25410.143.255.255
3710.144.0.0/1410.144.0.1 – 10.147.255.25410.147.255.255
3810.148.0.0/1410.148.0.1 – 10.151.255.25410.151.255.255
3910.152.0.0/1410.152.0.1 – 10.155.255.25410.155.255.255
4010.156.0.0/1410.156.0.1 – 10.159.255.25410.159.255.255
4110.160.0.0/1410.160.0.1 – 10.163.255.25410.163.255.255
4210.164.0.0/1410.164.0.1 – 10.167.255.25410.167.255.255
4310.168.0.0/1410.168.0.1 – 10.171.255.25410.171.255.255
4410.172.0.0/1410.172.0.1 – 10.175.255.25410.175.255.255
4510.176.0.0/1410.176.0.1 – 10.179.255.25410.179.255.255
4610.180.0.0/1410.180.0.1 – 10.183.255.25410.183.255.255
4710.184.0.0/1410.184.0.1 – 10.187.255.25410.187.255.255
4810.188.0.0/1410.188.0.1 – 10.191.255.25410.191.255.255
4910.192.0.0/1410.192.0.1 – 10.195.255.25410.195.255.255
5010.196.0.0/1410.196.0.1 – 10.199.255.25410.199.255.255
5110.200.0.0/1410.200.0.1 – 10.203.255.25410.203.255.255
5210.204.0.0/1410.204.0.1 – 10.207.255.25410.207.255.255
5310.208.0.0/1410.208.0.1 – 10.211.255.25410.211.255.255
5410.212.0.0/1410.212.0.1 – 10.215.255.25410.215.255.255
5510.216.0.0/1410.216.0.1 – 10.219.255.25410.219.255.255
5610.220.0.0/1410.220.0.1 – 10.223.255.25410.223.255.255
5710.224.0.0/1410.224.0.1 – 10.227.255.25410.227.255.255
5810.228.0.0/1410.228.0.1 – 10.231.255.25410.231.255.255
5910.232.0.0/1410.232.0.1 – 10.235.255.25410.235.255.255
6010.236.0.0/1410.236.0.1 – 10.239.255.25410.239.255.255
6110.240.0.0/1410.240.0.1 – 10.243.255.25410.243.255.255
6210.244.0.0/1410.244.0.1 – 10.247.255.25410.247.255.255
6310.248.0.0/1410.248.0.1 – 10.251.255.25410.251.255.255
6410.252.0.0/1410.252.0.1 – 10.255.255.25410.255.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /8
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,2141
/9255.128.0.08,388,6088,388,6062 split →
/10255.192.0.04,194,3044,194,3024 split →
/11255.224.0.02,097,1522,097,1508 split →
/12255.240.0.01,048,5761,048,57416 split →
/13255.248.0.0524,288524,28632 split →
/14255.252.0.0262,144262,14264 split →
/15255.254.0.0131,072131,070128 split →
/16255.255.0.065,53665,534256 split →
/17255.255.128.032,76832,766512 split →
/18255.255.192.016,38416,3821,024 split →
/19255.255.224.08,1928,1902,048 split →
/20255.255.240.04,0964,0944,096 split →
/21255.255.248.02,0482,0468,192 split →
/22255.255.252.01,0241,02216,384 split →
/23255.255.254.051251032,768 split →
/24255.255.255.025625465,536 split →
/25255.255.255.128128126131,072 split →
/26255.255.255.1926462262,144 split →
/27255.255.255.2243230524,288 split →
/28255.255.255.24016141,048,576 split →
/29255.255.255.248862,097,152 split →
/30255.255.255.252424,194,304 split →
/31255.255.255.254228,388,608 split →
/32255.255.255.2551116,777,216 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →